TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Center Mount-To-Body | 15 (21) | ||
| Driveshaft-To-Drive Flange (Rear Axle) | |||
| Version, Universal Joint: Compression Nut | 47 (64) | ||
| Version, Universal Joint: Torx Bolt | 63 (85) | ||
| Version, Constant-Velocity Joint: Compression Nut M8 Thread | 24 (32) | ||
| Compression Nut M10 Thread | 47 (64) | ||
| Finned Nut M8 Thread | 32 (43) | ||
| Finned Nut M10 Thread | 52 (70) | ||
| Flexible Disk-To-Propeller Shaft & Transmission Output Flange (Steel) | |||
| M10 8.8 Thread | 35 (48) | ||
| M10 10.9 Thread | 47 (64) | ||
| M12 10.9 Thread | 66 (90) | ||
| Reinforcement Plate-To-Front Axle Support/Engine Carrier | |||
| Step 1 | 41 (56) | ||
| Step 2 | Additional 90° | ||
| Step 3 | Additional 15° | ||
| Rubber Mounts-To-Cross Member Or Transmission | 15 (21) | ||
| Torque Converter-To-Flywheel | 33 (45) | ||
| Transmission Cross-Member-To-Body | 15 (21) | ||
| Transmission-To-Engine | |||
| Hex Screws | |||
| M8 Thread | 18 (24) | ||
| M10 Thread | 33 (45) | ||
| M12 Thread | 60 (82) | ||
| Torx Bolts | |||
| M8 Thread | 15 (21) | ||
| M10 Thread | 31 (42) | ||
| M12 Thread | 53 (72) | ||
| INCH Lbs. (N.m) | |||
| Clamping Screw On Shift Lever | 89 (10) | ||
TORQUE SPECIFICATIONS