Home/Audi/S8/Audi S8 D2 рестайлинг 2 (2002-2003)/Repair manual/On Board Diagnostic (OBD)/CCS, deactivating

Contents

Section: On Board Diagnostic (OBD)

General information

Malfunction message "dEF" on trip recorder display

Notes for replacing instrument cluster

Additional information

Safety precautions

Test requirements

Check DTC Memory (function 02)

Diagnostic Trouble Code (DTC) table

Output Diagnostic Test Mode (DTM) (function 03)

Initiating output Diagnostic Test Mode

Erase DTC Memory (function 05)

Requirements

End Output (function 06)

Code Control Module (function 07)

Initiating coding

Initiating "Read Measuring Value Block"

Display group overview

Adaptation (function 10)

Adaptation table

Initiating "Adaptation" function 10

Resetting SRI after service

Adaptation of fuel gauge

Language version of driver information monitor

Odometer display

Adaptation of auxiliary heater

Adaptation of fuel gauge sender resistance range

Distance driven since service

Time since service

Minimum mileage performance

Maximum mileage performance

Maximum time interval

Adaptation of oil quality

Adaptation of total consumption quantity

Adaptation for power train data-BUS

Adaptation value

Adaptation for comfort system databus

Adaptation for information data-BUS

Adapatation value

Input values for replacing instrument cluster

Perform the following steps after replacing instrument cluster

Data exchange between control modules, checking

Checking bus system

Checking a "two-line bus system"

Example 1

Example 2

Example 3

If you cannot determine a cause for the malfunction, e.g. "power train data-BUS faulty", check whether one of the control modules may be responsible for the DTC

Function

Notes for use and adaptation of vehicle key

Check Control Module Versions (function 01)

Adaptation of vehicle keys

Lost key procedure

Determining the secret number

Adaptation after replacing the instrument cluster

Adaptation after replacing the Engine Control Module (ECM)

Adaptation after replacing the instrument cluster and the Engine Control Module (ECM)

Procedure

Login procedure

Login Procedure, instrument cluster

Login procedure, Engine Control Module (ECM)

Emergency start function using VAG 1551

CCS, checking

CCS, activating

CCS, deactivating

Electrical test using VAG 1598/31 test box

Output Diagnostic Test Mode (function 03)

Basic Setting (function 04)

Perform basic setting

Coding table

All sections

CCS, deactivating Audi S8 D2 рестайлинг 2

On Board Diagnostic (OBD) 2 illustrations

CCS, deactivating

Connect the VAS 5051 tester or VAG 1551 scan tool. See «VAS 5051 TESTER OR VAG 1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS»(/audi/s8/d2-2-2002-2003/remont/collisionavoidance/#on-board-diagnostic-obd) .
Select the control module for engine electronics using address word 01.

Indicated on display

Scheme 330

Scheme 330

Scheme 330

Press button -1- twice for the "Login procedure" function and confirm input by pressing the -Q- button.

Indicated on display

Scheme 331

Scheme 331

Scheme 331

Press buttons -1-, -6-, -1-, -6- and -7- to select code number 16167. Press -Q- button to confirm input.