Level control system sensor, removing and installing
- Level control system sensor, removing and installing --> «Front Vehicle Level Sensor , removing and installing»(/audi/s6/c6-2006-2008/remont/axle-shafts/#suspension-wheels-steering__front-vehicle-level-sensor-removing) .
Scheme 124
1 - Wheel bearing housing
- Removing and installing --> «Wheel bearing housing, removing and installing»(/audi/s6/c6-2006-2008/remont/axle-shafts/#suspension-wheels-steering__wheel-bearing-housing-removing-and-installing)
2 - Hex nut
3 - Bolt
4 - Hex bolt, 7 Nm
- For setting toe constants "S"
5 - Self-locking hex nut, 45 Nm
6 - Ball bearing
- Removing and installing --> «Wheel bearing unit, removing and installing»(/audi/s6/c6-2006-2008/remont/axle-shafts/#suspension-wheels-steering__wheel-bearing-unit-removing-and-installing)
7 - Wheel hub
- Pressing out and pressing in --> «Wheel bearing unit, servicing»(/audi/s6/c6-2006-2008/remont/axle-shafts/#suspension-wheels-steering)
8 - Collar bolt, 200 Nm plus an additional 180 ° turn
- Always replace after removal
- Observe work sequence with loosening and tightening collar bolt --> «Collar bolt for outer joint of drive axle, loosening and tightening»(/audi/s6/c6-2006-2008/remont/axle-shafts/#suspension-wheels-steering__collar-bolt-for-outer-joint-of)
9 - Hex bolt, 45 Nm
10 - Brake heat shield
11 - Socket-head bolt, 10 Nm
12 - Wheel speed sensor
13 - Socket-head bolt, 8 Nm
14 - Self-locking hex nut, 110 Nm
- Always replace after removal
- After loosening threaded connection of control arm to wheel bearing housing, adhesive residue must be removed on thread of linkage stub.
15 - Self-locking hex nut, 110 Nm
- Always replace after removal
- After loosening threaded connection of guide link to wheel bearing housing, adhesive residue must be removed on thread of linkage stub.
16 - Control arm
17 - Guide link
18 - Countersunk bolt, 80 Nm plus an additional 90 ° (1/4 turn)
- Always replace after removal
19 - Twelve-point socket head bolt, 70 Nm
20 - Drive axle