Manual sections

Wiring diagrams

• 6 Spd. Manual Transmission - 01e
• 6 Spd. Manual Transmission 01e - Transmission Removal
• Abbreviations
• Air Conditioning
• Application
• Automatic Trans
• Auxiliary Emission Control Systems
• Axle Shafts
• Basic Trouble Shooting
• Brake System
• Brake System - ABS
• Brake System - on Board Diagnostic (OBD) - ABS & ESP
• Brakes
• Cabin Air Filter
• Charging System
• Check Lists
• Communication Devices
• Computer Relearn
• Cooling Fan
• Cruise Control Systems
• Diagnostic Connector Locations
• Door Locks & Anti-Theft Systems
• Drive Cycles
• Driveline/axles
• DTC Index
• Electrical Component Locations
• Emission Applications
• Engine
• Engine Performance
• Exhaust
• Exterior Body Panels
• Exterior/interior Trim
• Fuel Supply System - All Engines
• Fuel System
• Fuses & Circuit Breakers
• Gauges & Instrument Panels
• Identification
• Ignition System
• Maintenance
• Manual Trans
• MAP Guidelines
• Mechanical
• Metric Conversions
• Mirrors
• Mode 6
• Multiport Fuel Injection (mfi) - 4.2l v8 5v - Bbd
• On Board Diagnostic (OBD) - 2001 and Up
• On Board Diagnostic (OBD) - 4.2l v8 5v - Bbd
• On Board Diagnostic (OBD) - 5 Spd. Automatic Transmission, 01l All Wheel Drive
• On Board Diagnostic (OBD) - Central Locking System, Memory Seats, Ultrasonic Interior Monitor
• On Board Diagnostic (OBD) - HVAC
• On Board Diagnostic (OBD) - Radio, Navigation, Steering & Telematics
• On Board Diagnostic (OBD) - Suspension & Tire Pressure Monitoring
• Reset Procedures
• Restraints
• Seats
• Self Leveling Suspension
• Specifications
• Steering
• Steering Column Switches
• Sun Roof/t-Top/convertible Top
• Suspension - Front
• Suspension - Rear, Awd
• Testing & Diagnostics
• Timing Belt
• Transmission
• Warning System
• Wheel Alignment
• Wiper/washer Systems
• Wiring Diagrams - Engine Performance

Repair manual

On Board Diagnostic (OBD) - 4.2l v8 5v - Bbd Audi S6 C5

Step-by-step instructions on "On Board Diagnostic (OBD) - 4.2l v8 5v - Bbd" for Audi S6 C5 (2002–2003). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

56subsections

56articles

126illustrations

Features

1 article

• Features

Functions which can be selected when using V.A.G 1551 Scan Tool

1 article

• Functions which can be selected when using V.A.G 1551 Scan Tool

Malfunction Indicator Lamp (MIL) -K83-, function

1 article

• Malfunction Indicator Lamp (MIL) -K83-, function 1

Flashing of MIL -K83

1 article

• Flashing of MIL -K83

Continuous illumination of malfunction indicator lamp (MIL) -K83

1 article

• Continuous illumination of malfunction indicator lamp (MIL) -K83

Functional check

1 article

• Functional check

Electronic Power Control (EPC) warning lamp -K132- (for electronic throttle), function

1 article

• Electronic Power Control (EPC) warning lamp -K132- (for electronic throttle), function 1

Functional check on warning lamp

1 article

• Functional check on warning lamp

Vehicle Diagnostic, Testing and Information System VAS 5051, connecting and selecting engine control module

1 article

• Vehicle Diagnostic, Testing and Information System VAS 5051, connecting and selecting engine control module 1

Test conditions

1 article

• Test conditions 1

Selecting operating mode

1 article

• Selecting operating mode 1

Selecting vehicle system

1 article

• Selecting vehicle system 1

Selecting diagnostic function

1 article

• Selecting diagnostic function 11

Diagnostic Trouble Code (DTC) memory, checking and erasing

1 article

• Diagnostic Trouble Code (DTC) memory, checking and erasing 5

Automatic test sequence

1 article

• Automatic test sequence 2

Diagnostic Trouble Code (DTC) table

1 article

• Diagnostic Trouble Code (DTC) table

DTCs P0101 to P1199, VAG 16485 to 17607

1 article

• DTCs P0101 to P1199, VAG 16485 to 17607

DTCs P1201 to P3262, VAG 17609 to 19718

1 article

• DTCs P1201 to P3262, VAG 17609 to 19718

Output Diagnostic Test Mode (DTM)

1 article

• Output Diagnostic Test Mode (DTM)

Output DTM sequence for all vehicles up to m.y. 2001

1 article

• Output DTM sequence for all vehicles up to m.y. 2001 2

Actuating Evaporative emission (EVAP) canister purge regulator valve -N80

1 article

• Actuating Evaporative emission (EVAP) canister purge regulator valve -N80 1

Actuating Secondary Air Injection (AIR) solenoid valve -N112

1 article

• Actuating Secondary Air Injection (AIR) solenoid valve -N112 1

Actuating Secondary Air Injection (AIR) pump relay - J299

1 article

• Actuating Secondary Air Injection (AIR) pump relay - J299 1

Actuating Intake manifold change -over valve -N156

1 article

• Actuating Intake manifold change -over valve -N156 1

Actuating camshaft adjustment valves

1 article

• Actuating camshaft adjustment valves 1

Actuating Leak Detection Pump (LDP) -V144- of tank ventilation system

1 article

• Actuating Leak Detection Pump (LDP) -V144- of tank ventilation system 1

Actuating Intake Manifold Tuning (IMT) valve 2 -N261- (test omitted in S6 models)

1 article

• Actuating Intake Manifold Tuning (IMT) valve 2 -N261- (test omitted in S6 models) 1

Checking left and right engine mountings

1 article

• Checking left and right engine mountings 2

Actuating injectors

1 article

• Actuating injectors 18

The output Diagnostic Test Mode (DTM) activates the following components in the stated order

1 article

• The output Diagnostic Test Mode (DTM) activates the following components in the stated order 5

Bank 2, actuating valve for camshaft adjustment

1 article

• Bank 2, actuating valve for camshaft adjustment 2

Intake air switch-over valve -N335- (S6 models)

1 article

• Intake air switch-over valve -N335- (S6 models) 4

Bank 1, actuating valve for camshaft adjustment

1 article

• Bank 1, actuating valve for camshaft adjustment 19

With engine stopped and ignition switched on, the following operation can be performed with the "Function 04" basic setting

1 article

• With engine stopped and ignition switched on, the following operation can be performed with the "Function 04" basic setting

With the "engine running", the following operations can be performed in the basic setting mode "Function 04"

1 article

• With the "engine running", the following operations can be performed in the basic setting mode "Function 04"

Test conditions for operations with engine running

1 article

• Test conditions for operations with engine running 7

Engine Control Module (ECM), coding

1 article

• Engine Control Module (ECM), coding 2

Compose the code number as follows (example)

1 article

• Compose the code number as follows (example) 2

Coding variations for the engine control module

1 article

• Coding variations for the engine control module

Safety precautions

1 article

• Safety precautions

Procedure

1 article

• Procedure 3

Readiness code

1 article

• Readiness code

The readiness code is reset to

1 article

• The readiness code is reset to

Test sequence

1 article

• Test sequence 8

Special tools and workshop equipment required

1 article

• Special tools and workshop equipment required

Operation 1: Checking DTC memory

1 article

• Operation 1: Checking DTC memory 2

Operation 2: Erase DTC memory

1 article

• Operation 2: Erase DTC memory 2

The readiness code can be generated in two ways

1 article

• The readiness code can be generated in two ways 3

Operation 4: Diagnosis of fuel supply system

1 article

• Operation 4: Diagnosis of fuel supply system 2

Operation 5: Checking oxygen sensor heater

1 article

• Operation 5: Checking oxygen sensor heater 2

Important notes for display groups 41 and 42: Display zones 1 and 3

1 article

• Important notes for display groups 41 and 42: Display zones 1 and 3 2

Operation 7: Diagnosis of oxygen sensor condition behind catalytic converter.

1 article

• Operation 7: Diagnosis of oxygen sensor condition behind catalytic converter. 2

Operation 8: Diagnosis, oxygen sensor control system

1 article

• Operation 8: Diagnosis, oxygen sensor control system 2

Operation 9: Catalytic converter diagnosis

1 article

• Operation 9: Catalytic converter diagnosis 2

Operation 10: Diagnosis of secondary air system

1 article

• Operation 10: Diagnosis of secondary air system 2

Operation 11: Reading readiness code

1 article

• Operation 11: Reading readiness code