FASTENER TIGHTENING SPECIFICATIONS
| Component | Nm |
|---|---|
| 12 V Socket 3 Mount Nut | 2 |
| Converter Socket Screws To Cupholder | 1.4 |
| Data Bus On Board Diagnostic Interface Screw | 3 |
| High and Low Tone Horn Fasteners To Impact Member | 9 |
| Instrument Cluster Screws | 2.5 |
Scheme 1
Remove front ashtray. Refer to Removal and Installation.
Pry out cover -1- over cigarette lighter illumination -L28- -arrows-.
Carefully pry the cigarette lighter illumination -item 3- in the -direction of the arrow- out of the cigarette lighter -U1- -item 2- using a narrow screwdriver -1-.
Scheme 2
See also:
• Removal and Installation