Home ReviewsRefund
Home/Audi/S4/Audi S4 B8 (2008-2011)/Repair manual/Electrical Equipment/Steering Angle Sensor G85 , removing and installing
Contents Wiring diagrams Section: Electrical Equipment All sections

Steering Angle Sensor G85 , removing and installing Audi S4 B8

Electrical Equipment 1 illustration ~104 words

Steering Angle Sensor G85 , removing and installing

Note. Should the Steering Angle Sensor G85 require replacement, follow applicable component "Replacement" as well as "zero - calibrate" procedure using VAS 5051/5051 in operating mode "Guided Fault Finding".

Removing

  1. Remove spiral spring --> «Spiral spring, removing and installing»(/audi/s4/b8-2008-2011/remont/cruise-control-systems/#electrical-equipment__spiral-spring-removing-and-installing) .

Scheme 287

Scheme 287
Scheme 287
  1. Remove Steering Angle Sensor G85 - 1 - from Steering Column Electronic Systems Control Module J527 in direction of - arrow -.

Installing

Install in reverse order of removal, noting the following

  1. Perform "zero - calibrate" procedure using VAS 505/5052 in operating mode "Guided Fault Finding".