Home ReviewsRefund
Home/Audi/S4/Audi S4 B8 (2008-2011)/Repair manual/Electrical Equipment/Removing
Contents Wiring diagrams Section: Electrical Equipment All sections

Removing Audi S4 B8

Electrical Equipment 5 illustrations ~125 words

Removing

  1. Disconnect battery --> «Battery in engine compartment, disconnecting and reconnecting»(/audi/s4/b8-2008-2011/remont/cruise-control-systems/#electrical-equipment__battery-in-engine-compartment-disconnecting-and) .

Scheme 39

Scheme 39
Scheme 39
  1. Remove front engine cover - arrows -.
CAUTIONBefore removing ribbed belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.

Scheme 40

Scheme 40
Scheme 40
  1. Relieve ribbed belt tension by turning tensioner in direction of - arrow -.
  2. Remove ribbed belt from power steering pump pulley.
  3. Lift vehicle.
  1. Release fasteners - 1 - and - 2 - and remove front noise insulation.

Scheme 41

Scheme 41
Scheme 41
  1. Remove cable ties - arrows - , unclip cover for starter cable guide harness and remove harness from guide.

Vehicles with automatic transmission

Scheme 42

Scheme 42
Scheme 42
  1. Remove nuts - 1 - and - 2 -.
  2. Remove bracket for ATF lines.

All models

  1. Unclip refrigerant line from bracket at sump.
  2. Disconnect electrical connections at generator.
  3. Remove bolts - arrows -.

Scheme 43

Scheme 43
Scheme 43
  1. Remove generator.