FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| Air Duct | 2.5 | |
| Bleeder Screw | 9 | |
| Coolant Line to the Cylinder Heads (3) | ||
| Bolt | 9 | |
| Banjo Bolt | 15.5 | |
| Condenser | 8 | |
| Connecting Piece | 9 | |
| Coolant Fan with Coolant Fan Control (FC) Control Module | 10 | |
| Coolant Pipe for the Fuel System Coolant Circuit | 8 | |
| Coolant Temperature Sensor | 2 | |
| Coolant Thermostat for the Exhaust Gas Recirculation with Connection | 9 | |
| Coolant Thermostat with Connection | 9 | |
| Engine Lifting Eye (1) | ||
| 2.7 | ||
| 23 | ||
| Engine Lifting Eye (2) | 23 | |
| Fuel System Cooler | ||
| Bleeder Screw | 1.5 to 3 | |
| Bolt | 8 | |
| Hydraulic Oil Cooling Pipe | 8 | |
| Left Coolant Pipe | 9 | |
| Left Rear Coolant Pipe | 9 | |
| Left Rear Coolant Pipe on the Exhaust Gas Recirculation Auxiliary Cooler | 9 | |
| Left Rear Coolant Pipe on the Transmission | 9 | |
| Radiator | 5.5 | |
| Rear Coolant Pipe | 9 | |
| Ribbed Belt Pulley for Coolant Pump | 23 | |
| Right Coolant Pipe (2) | ||
| Nut | 9 | |
| Bolt | 23 | |
| Bolt | 9 | |
| Upper Coolant Pipe, Nut | 9 | |
| Upper Left Coolant Pipe | 9 | |
| Upper Right Coolant Pipe | 9 | |
| (1) For bolt tightening clarification, refer to Exhaust Gas Recirculation Cooler Pump -V400- OVERVIEW and see items -3 and 4- (2) For bolt tightening clarification, refer to COOLANT PIPES OVERVIEW Part 1 and see items -2, 4 and 8- (3) For bolt tightening clarification, refer to COOLANT PIPES OVERVIEW Part 2 and see items -2 and 3 | ||
| (1) | For bolt tightening clarification, refer to Exhaust Gas Recirculation Cooler Pump -V400- OVERVIEW and see items -3 and 4 |
| (2) | For bolt tightening clarification, refer to COOLANT PIPES OVERVIEW Part 1 and see items -2, 4 and 8 |
| (3) | For bolt tightening clarification, refer to COOLANT PIPES OVERVIEW Part 2 and see items -2 and 3 |
Coolant Pump - Tightening Specification and Sequence
Tighten the coolant pump bolts -arrow- in a diagonal sequence in stages to 9 Nm.
Vehicles Built through 05.10: Fuel Cooler Pump -V166-, Tightening Specifications
Tighten the fuel cooler pump bracket bolt -arrow- to 23 Nm.