BELT ADJUSTMENT
Note. If reinstalling original belt, mark direction of rotation on belt before removing for installation reference.
BELT ADJUSTMENT SPECIFICATIONS
| Application | Specification |
|---|
| All Models | (1) |
| (1) Serpentine belt tension is automatically adjusted. |
| (1) | Serpentine belt tension is automatically adjusted. |
| Model | Specification |
|---|
| Coolant Replacement Interval | (1) |
| Coolant Capacity (Includes Heater) | 11.6 Qts. (11.0L) |
| Thermostat Starts To Open | 188°F (87°C) |
| Thermostat Fully Open | 216°F (102°C) |
| (1) Inspect coolant level every 15,000 miles. Cooling system uses a permanent type coolant which does not require replacement under normal service. If adding to coolant, use manufacturer specified Coolant (G 011 V8C). Coolant mixture must be at least 50 percent, but no greater than 60 percent. |
| (1) | Inspect coolant level every 15,000 miles. Cooling system uses a permanent type coolant which does not require replacement under normal service. If adding to coolant, use manufacturer specified Coolant (G 011 V8C). Coolant mixture must be at least 50 percent, but no greater than 60 percent. |
COOLING SYSTEM SPECIFICATIONS
