Home ReviewsRefund
Home/Audi/A8/Audi A8 D3 facelift 2 (2007-2010)/Repair manual/Cooling Fan/4.2L V8 4V Engine Mechanical, Engine Code(s): Bvj: NVH
Contents Wiring diagrams Section: Cooling Fan All sections

4.2L V8 4V Engine Mechanical, Engine Code(s): Bvj: NVH Audi A8 D3 facelift 2

Cooling Fan ~149 words

Vibration damper, removing and installing

Removing

  1. Remove front sound insulation by loosening fasteners - 1 -.

Note. Ignore items - 2, 3, 4 -.

  1. Remove bolts - arrows - and remove coolant pipes to ATF cooler with coolant hoses - 1 through 4 - connected from lock carrier.
  1. Loosen 8 bolts - arrow - on vibration damper several turns by counterholding on generator belt pulley centered nut with open end wrench.
  2. Remove ribbed belt --> «Ribbed belt, removing and installing»(ref-289203-S08720727742008062700000)
  3. Remove bolts - arrows - and remove vibration damper.

Installing

  1. Tightening torque --> «Vibration damper tightening sequence»(ref-289203-S31530453332009012200000)

Installation is in reverse order of removal, note the following

Note. Replace bolts which have been tightened to torque. Installation of harmonic balancer is only possible in one position - note alignment bushing.

  1. Install ribbed belt --> «Ribbed belt, removing and installing»(ref-289203-S08720727742008062700000) .

More articles — 4.2L V8 4V Engine Mechanical, Engine Code(s): Bvj