Repair manual
Wiring diagrams
Audi A8 D3 facelift 2 Repair Manual
Step-by-step repair and maintenance instructions for the Audi A8 D3 facelift 2 (2007–2010): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
56sections
1696articles
ENManual language
- Engine data
- Safety precautions
- Procedure before opening fuel injection system high pressure area
- Rules for cleanliness
- Engine, removing
- Engine and transmission, separating
- Engine, installing
- Left and right engine mounts, removing and installing
- Ribbed belt, removing and installing
- Crankshaft seal, ribbed belt side, replacing
- Cylinder block, transmission side
- Drive plate, removing and installing
- Transmission-side crankshaft sealing ring, replacing
- Crankshaft
- Allocation of crankshaft bearing shells for cylinder block
- Allocation of crankshaft bearing shells for guide frame
- Crankshaft dimensions
- Axial clearance, measuring
- Radial clearance, measuring
- Piston and cylinder dimensions
- Radial clearance of connecting rod, measuring
- Left cylinder head cover, removing and installing
- Right cylinder head cover, removing and installing
- Left and right timing chain covers, removing and installing
- Removing
- Installing
- Timing chain lower cover, removing and installing
- Camshaft timing chain, removing and installing
- Drive chain for timing mechanism, removing and installing
- Power take-off drive chain, removing and installing
- Spur gear unit, removing and installing
- Valvetrain
- Camshaft axial play, measuring
- Valve guides, checking
- Valves, checking
- Oil pump and lower part of oil pan
- Lower part of oil pan, removing and installing
- Oil pump, removing and installing
- Upper part of oil pan, removing and installing
- Oil check valve and spray nozzle valve, removing and installing
- Crankcase ventilation hose, removing and installing
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Engine oil
- Oil level, checking
- Cooling system
- Filling
- Coolant pump, removing and installing
- Map Controlled Engine Cooling Thermostat F265 , removing and installing
- Coolant thermostat opening data
- Engine Coolant Temperature (ECT) Sensor G62 , removing and installing
- Front coolant line, removing and installing
- Rear coolant line, removing and installing
- Left coolant pipe, removing and installing
- Lower left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Fan shroud, removing and installing
- Coolant fan, removing and installing
- Front exhaust pipe and front muffler, separating
- Center muffler and rear muffler, separating
- End pipe, replacing
- Left front muffler, removing and installing
- Right front muffler, removing and installing
- Exhaust system, installing free of tension
- Tail pipes, aligning
- Left exhaust manifold with catalytic converter, removing and installing
- Right exhaust manifold with catalytic converter, removing and installing
- Principle and function
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for secondary air injection (AIR), checking function and for leaks
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Safety precautions
- Rules of cleanliness for performing work on fuel injection system
- Procedure that must be performed before opening the high-pressure fuel injection system - Pay close attention!
- Technical data
- Air filter element, removing and installing
- Mass Air Flow (MAF) Sensor G70 , removing and installing
- Fuel pressure and residual pressure before high pressure pump, checking
- Heated Oxygen Sensor (HO2S) G39 (in front of catalytic converter) and Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130 , cylinder bank 1, removing and installing
- Heated Oxygen Sensor (HO2S) 2 G108 (in front of catalytic converter) and Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 , cylinder bank 2, removing and insta
- Engine Control Module (ECM) J623 , removing and installing
- Ignition coils, removing and installing
- Technical Data
- General Repair Information
- Clean Working Conditions
- Fuel Supply System, Checking for Leaks
- Contact Corrosion
- Engine, Removing and Installing
- Engine, Removing
- Engine and Transmission, Separating
- Engine, Installing
- Lock Carrier, Moving into Service Position
- Belt Pulley Side, Servicing
- Ribbed Belt, Removing and Installing
- Timing Chain Side, Servicing
- Drive Plate, Removing and Installing
- Crankshaft Seal, Timing Chain Side, Replacing
- Seals for Threaded Studs, Replacing
- Timing Chain Covers, Removing and Installing
- Timing Chains for Camshaft Drive, Removing and Installing
- Camshaft Timing Chain, Removing and Installing
- Cylinder Head, Removing and Installing
- Cylinder bank 1 (right)
- Cylinder bank 2 (left)
- Cylinder Head Cover, Removing and Installing
- Intake Manifold, Removing and Installing
- Intake Manifold Left Side, Removing and Installing
- Intake Manifold Right Side, Removing and Installing
- Intake Manifold Upper Section, Removing and Installing
- Intake Manifold Lower Section, Removing and Installing
- Valve Gear, Servicing
- Camshaft Timing Adjusters, Removing and Installing
- Camshafts, Removing and Installing
- Valve Stem Seals, Replacing
- Camshafts, Checking Axial Clearance
- Valve Guides, Checking
- Valves, Checking
- Valve Seats, Reworking
- Determining maximum allowable reworking dimension
- Reworking exhaust valve seat
- Oil Pan Lower Section, Removing and Installing
- Oil Pump, Removing and Installing
- Oil Pan Upper Section, Removing and Installing
- Oil Filter Housing, Removing and Installing
- Engine Oil Cooler, Removing and Installing
- Oil Pressure and Oil Pressure Switch, Checking
- Engine Oil
- Engine Oil Level, Checking
- Cooling System Components, Removing and Installing
- Coolant Pump, Removing and Installing
- Coolant thermostat, checking
- Coolant thermostat, removing and installing
- Upper coolant pipe, removing and installing
- Removing
- Installing
- Upper left coolant pipe, removing and installing
- Lower left coolant pipe, removing and installing
- Upper right coolant pipe, removing and installing
- Middle right coolant pipe, removing and installing
- Lower right coolant pipe, removing and installing
- Front coolant pipe, removing and installing
- Radiator, removing and installing
- Coolant fan, removing and installing
- Auxiliary cooler, removing and installing
- Cooling system, checking for proper seal
- Exhaust system components, removing and installing
- Left front muffler, removing and installing
- Right front muffler, removing and installing
- Center muffler and rear muffler, separating
- Exhaust system, installing free of tension
- Exhaust system, checking for proper seal
- Secondary Air Injection (AIR), servicing
- Principle and function
- Combination valve for secondary air injection, checking function and for proper seal
- Secondary Air Injection (AIR) pumps, removing and installing
- Left combination valve for Secondary Air Injection (AIR), removing and installing
- Right combination valve for secondary air injection, removing and installing
- Exhaust flaps, checking
- Exhaust flap vacuum reservoir, checking
- Safety Precautions
- Clean Working Conditions
- Fuel Supply System Components, Removing and Installing
- Fuel Tank With Attachments
- Fuel Pumps, Checking
- EVAP System
- EVAP Canister, Removing and Installing
- EVAP System, Checking for Proper Seal
- EVAP Canister Purge Regulator Valve 2, Checking
- Right instrument panel fuse holder
- Check wires to control module
- EVAP Canister Purge Solenoid Valve, Removing and Installing
- Electronic Power Control
- Electronic Power Control Components, Servicing
- Accelerator Pedal Module with Throttle Position Sensors, Removing and Installing
- Throttle Position Sensor, Checking
- Checking voltage supply
- Fuel Injection System, Servicing
- Technical Data
- Engine Components, Checking
- Oxygen Sensor Heaters Before Catalytic Converter, Checking
- Oxygen Sensor Heaters After Catalytic Converter, Checking
- Mass Air Flow Sensor, Checking
- Throttle Valve Control Modules, Checking
- Coolant Temperature Sensor, Checking
- Intake Air Temperature Sensor, Checking
- Engine Speed Sensor, Checking
- Engine Coolant Temperature Sensor on Radiator, Checking
- MAP Controlled Thermostat, Checking
- Intake System, Checking for Leaks
- Coolant Fan Control Modules, Checking
- Fuel Injectors, Checking
- Checking wires to Engine Control Module (ECM)
- Fuel Injectors, Checking Injection Quantity and Seal
- Fuel Pressure Regulator and Residual Pressure, Checking
- Functions, Checking
- Oxygen Sensors and Oxygen Sensor Regulation Before Catalytic Converter, Checking
- Oxygen Sensors and Oxygen Sensor Regulation after Catalytic Converter, Checking
- Checking oxygen sensor wires to control module
- Engine Control Modules, Replacing
- Additional Signals, Checking
- Speed Signal, Checking
- Exhaust System Components, Removing and Installing
- Three Way Catalytic Converters, Checking
- Secondary Air Injection System
- Secondary Air Injection Combination Valve, Checking
- Secondary Air Injection, Left Combination Valve, Removing and Installing
- Secondary Air Injection, Right Combination Valve, Removing and Installing
- Secondary Air Injection Solenoid Valves, Checking
- Secondary Air Injection Pump Motors, Checking
- Combination Valves, Checking
- Ignition System, Servicing
- Ignition System Components, Removing and Installing
- Cylinder bank 1
- Cylinder bank 2
- Technical Data, Spark Plugs
- Ignition Coils With Power Output Stage, Removing and Installing
- Ignition Coils With Power Output Stages, Checking
- Check activation
- Terminal Resistance for CAN-Bus, Checking
- Camshaft Position Sensor, Checking
- Knock Sensors, Checking
- Transmission Regulating Electrical Components, Checking
- TCM Voltage Supply, Checking
- Transmission Control Module, Replacing
- Readiness Code
- Readiness Code, Reading
- Readiness Code, Generating
- Fuel and Air Metering and Auxiliary Emission Controls
- Fuel and Air Metering
- Ignition System
- Auxiliary Emission Controls
- Speed and Idle Control
- Control Module and Auxiliary Outputs
- Transmission
- Control Modules, Input and Output Signals
- Network, Electrical
- Network, Communication
- Network, Software
- Network, Data
- Notes on "6-Speed automatic transmission 09E"
- Repair instructions
- Front final drive
- Transfer case
- Rear final drive
- Rules of cleanliness for working on automatic transmissions
- Notes on tow starting and towing
- General repair instructions
- Rules for cleanliness when working on automatic transmission
- Selector mechanism, checking
- Check ignition key withdrawal lock
- Check locking button on selector lever handle
- Selector mechanism, manually releasing from "P" position
- Ignition key lock, checking
- Operating manual release for shift mechanism
- Shift mechanism, removing and installing
- Removing guide from frame
- Selector lever handle, removing and installing
- Shift unit, removing and installing
- Selector lever cable, removing and installing
- Selector mechanism cover, removing and installing
- Tiptronic switch F189 , removing and installing
- Rear transmission supports and transmission mounts, removing and installing
- Removing rear transmission supports with transmission mounts
- Installing rear transmission supports with transmission mounts
- Crossmember to body
- Front transmission supports and transmission mounts, removing and installing
- Shift mechanism function unit, removing and installing
- Complete shift mechanism with selector lever cable, removing and installing
- Actuator mechanism for manual release, removing and installing
- Selector lever cable, checking and adjusting
- Transmission (vehicles with 8-cylinder MPI engine), removing
- Transmission (vehicles with 8-cylinder MPI engine), installing
- Transmission, vehicles with 10-cylinder 5.2L FSI engine, removing and installing
- Transmission (vehicles with 12-cylinder 6.0L MPI engine (W12)), removing and installing
- Transmission, transporting
- Tunnel cross member, removing and installing
- ATF in planetary gearing
- ATF level, checking
- ATF cooler, removing and installing
- Oil pan, ATF screen and mechatronics unit, removing and installing
- Oil pan, removing and installing
- ATF screen, removing and installing
- Mechatronics unit, removing and installing
- Gear oil in automatic transmission
- Differentiation of separate or combined oil systems
- Gear oil level in final drive, transmissions with separate oil systems, checking
- Gear oil in front final drive, transmissions with separate oil systems, filling after repair
- Gear oil level in transfer case, transmissions with separate oil system, checking
- Gear oil in transfer case, transmissions with separate oil systems, filling after repair
- Gear oil level in transmission, transmissions with combined oil systems, checking
- Gear oil in transmission, transmissions with combined oil systems, filling after repair
- Right flange shaft, removing and installing
- Left flange shaft, removing and installing
- Right flange shaft seal, replacing
- Final drive/transmission housing shaft seal, replacing
- O-ring on final drive cover, replacing
- Selector shaft seal, replacing
- Self-locking center differential cover, removing and installing
- Self-locking center differential, removing and installing
- Front final drive gear oil
- Front final drive gear oil, checking
- Front final drive gear oil, topping off after repairs
- Front final drive, servicing
- Final drive/transmission housing oil seal, replacing
- Final drive cover O-ring, replacing
- Selector shaft oil seal, replacing
- Transfer gear oil
- Transfer case gear oil, checking and topping off
- Transfer case gear oil, topping off after repairs
- Torsen differential cover, removing and installing
- Rear flange shaft oil seal, replacing
- Driveshaft, servicing
- Driveshaft, removing and installing
- Driveshaft, adjusting
- Information on 6-speed automatic transmission 09L
- Planetary transmission
- Front final drive
- Transfer case
- Rear final drive
- Notes on tow starting and towing
- Contact corrosion!
- General Repair Notes
- Rules of cleanliness for working on automatic transmissions
- Selector mechanism, servicing
- Selector mechanism, checking
- Check ignition key withdrawal lock
- Check locking button on selector lever handle
- Selector mechanism, manually releasing from "P" position
- Selector lever handle, removing and installing
- Selector mechanism cover, removing and installing
- Tiptronic switch F189 , removing and installing
- Shift mechanism function unit, removing and installing
- Actuator mechanism for manual release, removing and installing
- Selector lever cable, removing and installing
- Selector lever cable, checking and adjusting
- Transmission, removing and installing
- Transmission, vehicles with V8 4.2L FSI engine, removing
- Transmission, vehicles with V8 4.2L FSI engine, installing
- Front transmission mount with transmission supports, vehicles with V8 engine, removing and installing
- Rear transmission mount and transmission supports, vehicles with V8 engine, removing and installing
- Automatic transmission, transporting
- ATF level in planetary gearing
- ATF level, checking and topping off
- ATF lines
- ATF lines and ATF cooler, cleaning
- ATF cooler (vehicles with V8 4.2L FSI engine), removing and installing
- ATF cooler bracket (vehicles with V8 4.2L FSI engine), removing and installing
- Oil pan, oil strainer and mechatronics unit, removing and installing
- Oil pan, removing and installing
- Oil strainer, removing and installing
- Mechatronic unit, removing and installing
- Gear oil level in front final drive
- Front final drive, checking gear oil level
- Front final drive, topping off gear oil after repair
- Front final drive, servicing
- Left flange shaft, removing and installing
- Right flange shaft, removing and installing
- Right flange shaft seal, replacing
- O-ring on final drive cover, replacing
- Final drive/transmission housing seal, replacing
- Selector shaft oil seal, replacing
- Transfer case, gear oil level
- Gear oil level in transfer case, checking
- Gear oil in transfer case, topping off after repair
- Differential, servicing
- Self-locking center differential cover, removing and installing
- Rear flange shaft oil seal, replacing
- Foam-filled cavities
- Straightening jig
- Portal gauge
- 50 52 55 00 Fender mounting flange - Replacing
- Welding in
- 50 74 55 00 Front wheel housing - Replacing
- 50 79 55 03 Front longitudinal member - Replacing
- Riveting new part
- Riveting in
- Inner B-pillar - Replacing
- Prepare new parts
- 53 48 55 62 Rear longitudinal member - Replacing
- Contact corrosion
- Service position for lock carrier
- Lock carrier with attachments, removing and installing
- Refrigerant lines for condenser, disconnecting and re-connecting
- Front brace
- Front fender
- Lower bracket for fender
- Center bracket for fender
- Hood, adjusting
- Trunk lid, removing and installing
- Right lid hinge
- Releasing gas from gas-filled strut
- Trunk lid lock and lock cylinder, removing and installing
- Drive motor for rear lid, removing and installing
- Drive motor for closing assist
- Lock plate with closing assist
- Trunk lid, adjusting
- Removing and installing fuel filler flap
- Door window, removing and installing
- Front driver
- Rear driver
- Preassembly of connecting elements
- Motor for window regulator, removing and installing
- Door handle
- Front door, adjusting
- Repairing the central locking system
- Window regulator motor, removing and installing
- Rear door handle
- Secures door handle in mount
- Engaging operating rod in door lock
- Rear door handle, removing and installing
- Engaging release cable in interior door mechanism
- Rear door, adjusting
- Sunroof, servicing
- Removing and installing wind deflector
- Wind deflector, adjusting
- Wind deflector motor, removing and installing
- Wind deflector motor, performing initialization
- Sunroof motor, removing and installing
- Sunroof panel, removing and installing
- Sunroof panel, removing
- Adjusting panel
- Interior trim, replacing
- Sunroof sliding headliner, removing and installing
- Panel seal, replacing
- Zero position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Parallel movement, checking and adjusting
- Sunroof, performing initialization and learning phase
- Wheel spoiler, removing
- Rear bumper cover, removing and installing
- Support piece for rear bumper, removing and installing
- Rear bumper, removing and installing
- Trailer hitch, removing and installing
- Function of balancing element
- Trailer hitch, installing
- Materials
- Minimum curing times!
- Cleaning when soiled by adhesive sealing material
- Windows, resealing
- Cover profile, adhering
- Preparatory steps
- Windshield, installing
- Undamaged side window, removing
- For undamaged removed windshield
- New window, installing
- Rear window, removing
- Installing rear window
- Roof trim molding, removing and installing
- Replacing side protective moldings
- Adjusting motor, removing and installing
- Mirror housing, removing and installing
- Mirror adjusting unit, removing and installing
- Window shaft strip for front door
- Window shaft strip for rear door
- Front section of front wheelhousing liner
- Rear section of front wheelhousing liner
- Dimensional data for front-wheel drive vehicles
- Dimensional data for All Wheel Drive (AWD) vehicles
- Lines, Routing and Securing
- Contact Corrosion
- Storage Compartments and Covers
- Glove Compartment Lid, Removing and Installing
- Driver Side Storage Compartment, Removing and Installing
- Storage Box in Driver Side Storage Compartment, Removing and Installing
- Steering Column Trim, Removing and Installing
- Coin Tray, Removing and Installing
- Center Console without Extension, Removing and Installing
- Front and Rear Carpet Strips, Removing and Installing
- Front A/C Controls, Removing and Installing
- Front Ashtray, Removing and Installing
- Front Ashtray Trim, Replacing
- Front Cigarette Lighter, Removing and Installing
- Center Console Trim with Multimedia Control Head, Removing and Installing
- Front Center Console Cupholder, Removing and Installing
- Rear Vents, 2-Zone A/C System, Removing and Installing
- Rear Center Console Trim, 2-Zone A/C System, Removing and Installing
- Rear Cigarette Lighter, 2-Zone A/C System, Removing and Installing
- Rear Storage Compartment, Removing and Installing
- Rear Storage Compartment Trim, Replacing
- Center Console Storage Compartment, Divided Center Armrest, Removing and Installing
- Rear Vents, 4-Zone A/C System, Removing and Installing
- Rear A/C Controls, 4-Zone A/C System, Removing and Installing
- Rear Cigarette Lighter, 4-Zone A/C System, Removing and Installing
- Rear Center Console Trim, 4-Zone A/C System, Removing and Installing
- Rear Air Distributor and Air Duct, Removing and Installing
- Rear Air Outlet Motors, Removing and Installing
- Rear Center Console Temperature Sensors, Removing and Installing
- Center Console Bracket, Center Armrest Bracket and A/C Controls/Front Ashtray Bracket, Removing and Installing
- Center Console with Extension, Removing and Installing
- Center Console Extension, Removing and Installing
- Small Storage Compartment, Removing and Installing
- Cupholder and Small Storage Compartment Cover, Removing and Installing
- Frame for Cupholder Unit with Small Storage Compartment Cover, Removing and Installing
- Large Storage Compartment, Removing and Installing
- Large Storage Compartment Sliding Cover, Removing and Installing
- Power Outlets in Large Storage Compartment, Removing and Installing
- Center Console Extension Bracket, Removing and Installing
- Front Center Console Extension
- Rear Center Console Extension
- Air Duct Adapter, Removing and Installing
- Rear Vents and Rear Climatronic Control Head, Removing and Installing
- One-Piece Front Center Armrest
- One-Piece Center Armrest, Removing and Installing
- One-Piece Center Armrest Bracket, Removing and Installing
- One-Piece Center Armrest Stop, Removing and Installing
- One-Piece Center Armrest Carrier, Removing and Installing
- One-Piece Center Armrest Upholstery, Removing and Installing
- One-Piece Center Armrest Cover, Removing and Installing
- One-Piece Center Armrest Gas-Filled Strut, Removing and Installing
- Divided Front Armrest
- Divided Front Center Armrest, Removing and Installing
- Lower Support Base, Divided Front Center Armrest, Removing and Installing
- Divided Front Center Armrest Cover, Removing and Installing
- Divided Front Center Armrest Upholstery, Removing and Installing
- Divided Front Center Armrest Storage Compartment, Removing and Installing
- Divided Front Center Armrest Lower Cover, Removing and Installing
- Trim, Removing and Installing
- Storage Compartment Lamp, Removing and Installing
- Divided Front Center Armrest, Separating
- Interior Rearview Mirror
- Interior Rearview Mirror, Removing and Installing
- Automatic Dimming Interior Rearview Mirror, Checking
- Cooler, Servicing
- Cooler, Removing and Installing
- Thermostat, Removing and Installing
- Cooler Interior Light Contact Switch, Removing and Installing
- LED Indicator, Removing and Installing
- Cooler Interior Light LED, Removing and Installing
- Battery Monitor, Removing and Installing
- Cooler Compressor Control Module, Removing and Installing
- Seat Belts
- Pyrotechnic Belt Tensioners, Safety Precautions
- Pyrotechnic Belt Tensioner Disposal
- Seat Belt Height Adjuster, Removing and Installing
- Rear Three-Point Seat Belt, Removing and Installing
- Third Rear Three-Point Seat Belt, Fixed Rear Seat Backrest, Removing and Installing
- Belt Latch, Replacing
- Passenger Occupant Detection Belt Latch, Replacing
- Retractor, Checking Locking Function
- Belt Guides and Locking Tongue, Checking
- Securing Components and Anchorage Points, Checking
- Child Seat Anchorage, Checking
- Rear Three-Point Seat Belts with Tensioners, Checking Belt Fastening Detection
- Airbag System
- Airbag System, General Safety Precautions
- Side Airbag, Additional Safety Precautions
- Side Curtain Airbag, Additional Safety Precautions
- Passenger Occupant Detection Sensor, Additional Safety Precautions
- Passenger Occupant Detection System, Measures Required after an Accident
- Airbag Control Module, Removing and Installing
- Battery Switch-Off Relay, Removing and Installing
- Battery Interrupt Igniter, Removing and Installing
- Airbag Units, Replacing after an Accident
- Mounting Components, Checking after an Accident
- Accident without Airbag Deployment
- Pyrotechnic Airbag Unit Disposal
- Driver Airbag, Removing and Installing
- Steering Wheel, Removing and Installing
- Airbag Spiral Spring/Return Spring With Slip Ring, Removing and Installing
- Front Passenger Airbag, Removing and Installing
- Front Side Airbag, Removing and Installing
- Rear Side Airbag, Removing and Installing
- Rear Side Airbag, Individual Power Seats, Removing and Installing
- Side Curtain Airbag, Removing and Installing
- Rear Deformation Element, Sedan, Removing and Installing
- Rear Deformation Element, Long Wheelbase, Removing and Installing
- Front Deformation Element, Removing and Installing
- Driver Knee Airbag, Removing and Installing
- Passenger Knee Airbag, Removing and Installing
- Driver Knee Airbag Deformation Element, Removing and Installing
- Passenger Knee Airbag Deformation Element, Removing and Installing
- Passenger Occupant Detection System, Removing and Installing
- Rear Side Airbag Deactivation, Fixed Backrest
- Rear Side Airbag Deactivation, Individual Power Seats
- Front Airbag Crash Sensor, Removing and Installing
- Front Side Airbag Crash Sensor, Removing and Installing
- Rear Side Curtain Airbag Crash Sensor, Removing and Installing
- LATCH Bracket, Removing and Installing
- Rear LATCH Bracket, Fixed Rear Seat Backrest
- Child Seat Anchor, Removing and Installing
- Front Door Trim
- Front Door Trim, Removing and Installing
- Trim Molding, Removing and Installing
- Front Door Trim Molding, Replacing
- Window Regulator Switch Strip, Removing and Installing
- Interior Door Release Mechanism with Central Locking Switch, Removing and Installing
- Door Warning Lamps and Footwell Lighting, Removing and Installing
- Interior Monitoring Switch Strip, Removing and Installing
- Hinged Pocket with Mount, Removing and Installing
- Hinged Pocket, Removing and Installing
- Tank Door/Rear Lid Release Switch, Removing and Installing
- Rear Door Trim
- Rear Door Trim, Removing and Installing
- Disengage release
- Door trim securing clip
- Treble Speaker, Removing and Installing
- Triangular Trim, Removing and Installing
- Mechanical Sun Shade, Removing and Installing
- Sun Shade Mounting Hooks, Removing and Installing
- Power Sun Shade, Removing and Installing
- Power Sun Shade Housing, Removing and Installing
- Power Sun Shade Drive Motor, Removing and Installing
- Side Blind Control Module, Removing and Installing
- Instrument Panel
- Left Trim Molding, Removing and Installing
- Right Trim Molding with Switch Strip, Removing and Installing
- Instrument Panel Vent, Removing and Installing
- Instrument Cluster Trim, Removing and Installing
- Front Information Display Control Head Trim, Removing and Installing
- Trim over Glove Compartment, Removing and Installing
- Right and Left Defroster Outlets, Removing and Installing
- Sunlight Photo Sensor with Cover, Removing and Installing
- Center Defroster Outlet, Removing and Installing
- Indirect Ventilation Trim, Removing and Installing
- Left Instrument Panel Cover, Removing and Installing
- Right Instrument Panel Cover, Removing and Installing
- Central Tube
- Instrument Panel, Separating from Central Tube
- Roof Trim
- Molded Headliner, Removing
- Sun Visor, Removing and Installing
- Sun Visor Mount, Removing and Installing
- Roof Reinforcement, Removing and Installing
- Trim
- Upper A-Pillar Trim, Removing and Installing
- Roof Grab Handle, Removing and Installing
- Upper and Lower A-Pillar Intermediate Piece, Removing and Installing
- Footrest, Removing and Installing
- Upper B-Pillar Trim, Removing and Installing
- C-Pillar Trim, Removing and Installing
- D-Pillar Trim, Removing and Installing
- Garment Hook, Removing and Installing
- Narrow D-Pillar Trim, Removing and Installing
- Rear Shelf, Removing and Installing
- Rear Window Power Sun Shade, Removing and Installing
- Vehicle Tool Kit and Warning Triangle, Removing and Installing
- Emergency Unlock Handle, Removing and Installing
- Handle Recess, Removing and Installing
- Rear Lid Lock Button, Removing and Installing
- Luggage Compartment Power Outlet, Removing and Installing
- Ventilation Grille, Removing and Installing
- Luggage Compartment Side Trim and Rain Channel Trim, Separating and Connecting
- Rear Panel Trim, Removing and Installing
- Tie-Downs, Removing and Installing
- Power Memory Front Seats
- Seat, Removing and Installing
- Airbag Adapter VAS 6229, Connecting
- Side Airbag, Disconnecting
- Front Backrest, Removing and Installing
- Seat Pan, Replacing
- Front Trim, Removing and Installing
- Four-Way Lumbar Support Switch, Removing and Installing
- Connector Station, Removing and Installing
- Seat Upper Frame, Replacing
- Safety Ground Lock, Removing and Installing
- Seat Cushion Extension Motor, Removing and Installing
- Rear Seats
- Side airbag connector
- Center Armrest, Removing and Installing
- Cupholder, Removing and Installing
- Center Bracket, Removing and Installing
- Headrests, Removing and Installing
- Center Headrest, Removing and Installing
- Center Headrest Blind, Removing and Installing
- Center Headrest Locking Mechanism, Removing and Installing
- Back Mat, Removing and Installing
- Individual Power Rear Seats
- Center Seat Section Bracket
- Center Backrest Section Release Handle, Removing and Installing
- Rear Shelf Trim and Spacer, Removing and Installing
- Control Module Carrier Plate, Removing and Installing
- Rear Seat Ventilation Control Modules, Separating from Carrier Plate
- Seat Pan Ventilation, Removing and Installing
- Backrest Ventilation, Removing and Installing
- Outer Seat Belt Strap, Removing and Installing
- Front Seat Covers and Upholstery, Power Memory Seats
- Seat Pan Cover, Separating from Upholstery
- Seat Cushion Extension Trim, Removing and Installing
- Backrest Cover and Upholstery, Separating from Backrest Frame
- Backrest Cover, Separating from Upholstery
- Headrest Guides, Removing
- Headrest Guides, Comfort Seat, Removing
- Seat Heating Element, Sport Seat, Removing and Installing
- Seat Side Bolster with Bonded Heating Element, Removing and Installing
- Backrest Heating Element, Removing and Installing
- Bonded Backrest Heating Element, Removing and Installing
- Headrest Cover and Upholstery, Removing and Installing
- Rear Bench Seat Covers and Upholstery
- Rear Bench Seat Cover, Separating from Upholstery
- Headrest Guides, Backrest Installed, Removing
- Headrest Guides, Backrest Removed, Removing
- Individual Power Rear Seat Covers and Upholstery
- Seat Pan Cover and Upholstery, Separating from Seat Pan
- Backrest Cover and Upholstery, Separating from Individual Rear Seat
- Seat Heating Element, Removing and Installing
- Brakes
- Notes for repair work on ABS
- Connecting VAS 5051 and selecting functions
- Hydraulic unit, removing and installing
- Removing
- Installing
- ABS Control Module J104 , replacing
- Speed sensor on front axle, removing and installing
- Speed sensor on rear axle, removing and installing
- Brake light switch, removing and installing
- Transverse Acceleration Sensor G200 and Rotation Rate Sensor G202 , removing and installing
- Steering Angle Sensor G85 , removing and installing
- Removing and installing
- Parking brake button, removing and installing
- Brake Pressure Sensor 1 G201 , removing and installing
- Front brakes, servicing
- Brake pads, removing and installing
- Brakes, servicing
- Brake caliper, removing and installing
- Brake pedal from brake booster, separating
- Brake pedal, removing and installing
- Mounting bracket, removing and installing
- Electromechanical parking brake, removing and installing
- Electromechanical parking brake actuator, removing and installing
- Brake caliper, servicing
- Front brake caliper piston, removing and installing
- Rear brake caliper piston, removing and installing
- Bleeding braking system
- Bleeding procedure for vehicles with Electronic Stabilization Program (ESP)
- Brake master cylinder, removing and installing
- Brake booster, removing and installing
- Line routing
- Brake line repairs
- Instructions
- Fiber optic MOST-Bus, notes
- Installed equipment tables, up to calendar week 21/04
- Installed equipment tables, as of calendar week 22/04
- Front Information Display Control Head Control Module J523 , removing and installing
- Front Information Display Control Head J685 , removing and installing
- Multimedia Control Head E380 , removing and installing
- Front/Center Console Control Head E461 , removing and installing
- Standard radio system, layout
- BOSE/BOSE 6000 radio system, layout
- Bang and Olufsen sound system, design
- Digital Sound System Control Module J525 - BOSE, connector assignments
- Digital Sound System Control Module J525 - BOSE 6000, connector assignments
- Digital Sound System Control Module J525 - Bang and Olufsen, connector assignments
- Digital Sound System Control Module 2 J787 - Bang and Olufsen, connector assignments
- CD Changer R41 / CD-Player R89 / CD-ROM Drive R92 , connector assignments
- Mini Disk Player R153 , connector assignments
- Digital Radio (DAB) R147 , connector assignments
- Antenna Amplifier R24 , connector assignments
- Speakers in doors, removing and installing
- Left Front Bass Speaker R21 , removing and installing
- Left Rear Mid/Low Range Speaker R159 , removing and installing
- Left Rear Treble Speaker R14 , removing and installing
- Removing Left Front Mid-range Speaker R103
- Removing Left Front Bass Speaker R21
- Removing cover of Left Front Bass Speaker R21
- Removing Left Rear Treble Speaker R14
- Removing Left Rear Mid/Low Range Speaker R159
- Speaker in instrument panel, removing and installing
- Left Front Mid-range Speaker R26 , removing and installing
- Removing and installing BANG and OLUFSEN loudspeakers
- Speaker in rear shelf, removing and installing
- Subwoofer (on rear shelf) R157 , removing and installing
- Speaker (in shelf) R150 , removing and installing
- Digital Sound System Control Module J525 - up to model year 05, removing and installing
- Digital Sound System Control Module J525 - as of model year 06, removing and installing
- Digital Sound System Control Module J525 BOSE - up to model year 05, removing and installing
- Digital Sound System Control Module J525 BOSE - as of model year 06, removing and installing
- Digital Sound System Control Module J525 BOSE 6000, removing and installing
- Digital Sound System Control Module J525 BANG and OLUFSEN, removing and installing
- Digital Sound System Control Module 2 J787 BANG and OLUFSEN, removing and installing
- Radio R , removing and installing
- Standard/BOSE sound system up to model year 05
- BANG and OLUFSEN sound system/all vehicles as of model year 06
- Digital Radio (DAB) R147 , removing and installing
- CD Changer R41 , removing and installing
- Antenna Amplifier R24 , removing and installing
- Radio system - Bang and Olufsen, layout
- Satellite Radio R146 , connector assignments
- Satellite Radio R146 - up to model year 05, removing and installing
- Satellite Radio R146 - as of model year 06, removing and installing
- Satellite Radio R146 - RSE light, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , removing and installing
- Antenna cable, servicing
- Bluetooth technology, notes
- Cellular phone preparation, layout
- Bluetooth car phone, layout
- Cell phone preparation preliminary setup connector
- Telephone Base plate R126 - center console, removing and installing
- Telephone Base plate R126 - front center armrest, removing and installing
- Telephone Base plate R126 , removing and installing
- Telephone Base plate R126 - rear center armrest, removing and installing
- Up to model year 02
- As of model year 03
- Telephone Antenna R65 - up to model year 02, removing and installing
- Telephone Antenna R65 - as of model year 03, removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Amplifier R86 , removing and installing
- Microphone Unit (in front roof module) R164 , removing and installing
- Microphone Unit (in front roof module) R164 , layout
- Telephone/Telematics Control Module J526 , removing and installing
- Navigation System with CD Drive Control Module J401 , connector assignments
- Navigation System with CD Drive Control Module J401 , removing and installing
- Navigation System Antenna R50 , removing and installing
- Removing and installing - RSE, up to model year 05
- Removing and installing, as of model year 06
- Vehicles without Digital Radio (DAB) R147
- Vehicles with Digital Radio (DAB) R147
- Multi-function steering wheel, layout
- Multi-function buttons, removing and installing
- Tiptronic Switch, removing and installing
- Telematics Control Head - OnStar controls
- Telematics Control Head - OnStar system status light
- Condition - system status light "green" plus
- Condition - system status light "red" or "flashing red"
- Telematics Service Mode, activating and deactivating
- Telematics system, layout
- Telephone/Telematics Control Module J526 , connector assignments
- Telephone/Telematics Control Module J526 , replacing and reconfiguring
- Replacing
- If the STID number and ESN were not readable from labels on the new control module, proceed as follows
- Continued for all
- Reconfiguration
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telematics Control Head E264 , removing and installing
- Removing
- Installing
- Speech Input Control Module J507 , connector assignments
- Speech Input Control Module J507 , removing and installing
- Malfunction messages
- Multimedia Display 1 Control Module J744 , removing and installing
- Multimedia Signal Splitter R181 , removing and installing
- Rear DVD Changer R162 , removing and installing
- Auxiliary Video/Audio Connection Module R176 , removing and installing
- Multimedia Display Unit 1 Y22 , removing and installing
- Remote control storage tray, removing and installing
- Voltage supply cable, connector assignment
- Monitor cable beneath seat, connector assignment
- Drivers Volume Control Button E374 , removing and installing
- Rear View Camera System Control Module J772 , removing and installing
- Rear view camera R189 , removing and installing
- 4.2L V8 4V Engine Mechanical, Engine Code(s): Bvj 6
- 4.2L V8 4V Fuel Injection and Ignition, Engine Code(s): Bvj 3
- 6.0L 12-CYL. 4V Engine Mechanical, Engine Code(s): Bsb 7
- 4.2L V8 4V Generic Scan Tool, Engine Code(s): Bvj 5
- 6.0L 12-CYL. 4V Fuel Injection and Ignition, Engine Code(s): Bsb 5
- 6.0L 12-CYL. 4V Generic Scan Tool, Engine Code(s): Bsb 7
- Contact Corrosion
- Battery
- Battery, Disconnecting and Connecting
- Battery, Removing and Installing
- Preparing for No Load Voltage Measurement
- Battery, Charging
- Battery, Preparing for Charging
- Battery, Preparing for Support Mode
- Battery Switch-Off Relay, Removing and Installing
- Battery Interrupt Igniter, Removing and Installing
- Energy Management Control Module, Removing and Installing
- Generator, Removing and Installing
- 4.2L MPI
- 4.2L FSI
- 5.2L FSI
- 6.0L MPI
- Generator, Servicing
- Starter, Removing and Installing
- Cruise Control System
- Instrument Cluster
- Instrument Cluster, Removing and Installing
- Instrument Cluster Multi-Pin Connectors, Contact Assignment
- 4-pin connector assignment on Fuel Level Sensor 2 G169
- 4-pin connector assignment on Fuel Level Sensor 4 G393
- Engine Coolant Temperature Sensor, Connector Assignment
- Coolant Temperature Sensor Electrical Connector, 4.2L FSI, Disconnecting
- Coolant Temperature Sensor Electrical Connector, 6.0L MPI, Disconnecting
- Radio Frequency Controlled Clock Receiver, Removing and Installing
- Garage Door Opener Control Module, Removing and Installing
- Horn
- Windshield Wiper System
- Windshield Wipers, Bringing into Service Position
- Windshield Wiper Blades, Replacing
- Windshield Wiper Arms, Removing and Installing
- Windshield Wiper Arms, Adjusting
- Windshield Wiper Motor and Control Module, Removing and Installing
- Windshield Wiper Motor and Control Module, Replacing
- Rain/Light Recognition Sensor, without Lane Assist, Removing and Installing
- Rain/Light Recognition Sensor, with Lane Assist, Removing and Installing
- Windshield Washer System
- Spray Nozzles, through 08.07, Removing and Installing
- Spray Nozzles, from 09.07, Removing and Installing
- Spray Nozzles, through 08.07, Adjusting
- Spray Nozzles, from 09.07, Adjusting
- Headlamp Washer System
- Headlamp Washer System Spray Nozzles, Removing and Installing
- Spray Nozzles, Adjusting
- Halogen Headlamps
- Halogen Headlamps, Removing and Installing
- Halogen Headlamps, Adjusting
- Preparing to Work on Headlamps
- Air Filter Housing Upper Section, Removing
- Low Beam Bulb, Replacing
- High Beam Bulb, Replacing
- Parking Lamp Bulb, Replacing
- Turn Signal Bulb, Replacing
- Headlamp Bracket, Replacing
- HID Headlamps
- HID Headlamps, Usage and Safety Precautions
- Headlamps, Removing and Installing
- Headlamps, Adjusting
- Air Filter Housing Upper Section, 8-Cylinder, Removing
- Left Air Filter Housing, 12-Cylinder, Removing
- Right Air Filter Housing, 12-Cylinder, Removing
- HID Headlamp, Replacing
- HID Headlamp Ignition Coil, through 08.07, Removing and Installing
- HID Headlamp Ignition Coil, from 09.07, Removing and Installing
- Daytime Running Lamp Bulb, Replacing
- High/Low Beam Switch-Over Solenoid, Removing and Installing
- Swivel Module Position Sensor and Dynamic Cornering Light Motor, Removing and Installing
- HID Headlamp Control Module, Removing and Installing
- HID Headlamp Power Output Stages, Removing and Installing
- Side Marker Lamps
- Side Marker Lamps, Removing and Installing
- Side Marker Lamp Bulbs, Replacing
- Fog Lamps, through 08.07
- Fog Lamps, Audi A8, Removing and Installing
- Fog Lamp Bulb, Audi A8 through 09.04, Replacing
- Fog Lamp Bulb, Audi A8 from 10.04, Replacing
- Fog Lamps, Audi S8, Removing and Installing
- Fog Lamp Bulb, Audi S8, Replacing
- Fog Lamps, Adjusting
- Fog Lamps, from 09.07
- Fog Lamp, Removing and Installing
- Fog Lamp Bulb, Replacing
- Side Turn Signals, through 08.07
- Side Turn Signals, from 09.07
- Exterior Mirror Turn Signal Lamps, Removing and Installing
- Exterior Mirror Entry Lamps, through 08.07
- Exterior Mirror Entry Lamps, from 09.07
- Exterior Mirror Entry Lamps, Removing and Installing
- Outside Door Handle Lamp
- Outer Tail Lamps, through 08.07
- Outer Tail Lamps, Removing and Installing
- Tail Lamp LED Circuit Boards, Removing and Installing
- Tail Lamp Control Module, Removing and Installing
- Tail Lamp, Aligning to Body Contour
- Outer Tail Lamps, from 09.07
- Inner Tail Lamps, through 08.07
- Inner Tail Lamps, Removing and Installing
- Back-Up Lamp and Rear Fog Lamp Bulb, Removing and Installing
- LED Circuit Boards and Tail Lamp Control Module, Removing and Installing
- Inner Tail Lamps, from 09.07
- Back-Up Lamp Bulb, Removing and Installing
- Fog Lamp Bulb, Removing and Installing
- High Mounted Brake Light
- License Plate Lamp
- License Plate Lamp, through 08.07, Removing and Installing
- License Plate Lamp, from 09.07, Removing and Installing
- Steering Column Switch Module
- Steering Column Switch Module, Removing and Installing
- Airbag Spiral Spring/Return Spring With Slip Ring, Removing and Installing
- Steering Angle Sensor, Removing and Installing
- Steering Column Electronic Systems Control Module, Removing and Installing
- Steering Column Electronic Systems Control Module, Front Side, Connector Assignment
- Turn Signal Switch, Removing and Installing
- Cruise Control Switch, Removing and Installing
- Windshield Wiper/Washer Switch, Removing and Installing
- Access/Start Authorization Switch
- Access/Start Authorization Switch, Removing and Installing
- Parking Aid
- Parking Aid Control Module, Removing and Installing
- Rear Parking Aid Warning Buzzer, Removing and Installing
- Automatic Headlamp Range Control
- Headlamp Range Control Module, Removing and Installing
- Switches
- Instrument Cluster Button in Cover, Removing and Installing
- Instrument Panel Button, Removing and Installing
- Light Switch, Removing and Installing
- Front Seat Heating Switch, Removing and Installing
- Rear Seat Heating Switch, Removing and Installing
- Glove Compartment Lamp Switch, Removing and Installing
- Light Recognition Sensor, Removing and Installing
- Humidity Sensor, without Lane Assist, Removing and Installing
- Humidity Sensor, with Lane Assist, Removing and Installing
- Garage Door Opener Control Head, Removing and Installing
- Rear Cigarette Lighter, Removing and Installing
- Rear Cigarette Lighter, with Rear A/C Display Control Head, Removing and Installing
- Power Window Control Head, Removing and Installing
- Window Regulator Switch, Removing and Installing
- Rear Window Switch, Removing and Installing
- Front Seat Memory Program Control Head, Removing and Installing
- Rear Lid Remote Control Lock Switch and Fuel Tank Lid Unlock Button Unit, Removing and Installing
- Seat Memory Lock-Out Button/Front Passenger Emergency Off Button, Memory Seat, Removing and Installing
- Door Contact Switch, Removing and Installing
- Front Interior Locking Switches, Removing and Installing
- Rear Interior Locking Switches, Removing and Installing
- Rear Lid Lock Button, Removing and Installing
- 12 V Outlet in Long Center Console, Removing and Installing
- 12 V Outlet in Luggage Compartment, through 06.04, Removing and Installing
- 12 V Outlet in Luggage Compartment, from 06.04, Removing and Installing
- Anti-Theft Immobilizer
- Access/Start Authorization System
- Rear Door Handle Switch, Removing and Installing
- Access/Start Authorization Control Module, Removing and Installing
- Interior Access/Start Authorization Antenna 1, Removing and Installing
- Interior Access/Start Authorization Antenna 2, Removing and Installing
- Luggage Compartment Access/Start Authorization Antenna, Removing and Installing
- Rear Bumper Access/Start Authorization Antenna, Removing and Installing
- Anti-Theft Alarm System with Ultrasonic Interior Monitoring
- Radar Interior Monitoring Control Modules, Removing and Installing
- Inclination/Anti-Theft Control Module, Removing and Installing
- Alarm Horn, Removing and Installing
- Interior Lamps
- Vanity Mirror Lamp, Removing and Installing
- Front Interior Lamp with Roof Electronics Control Module, through 08.07, Removing and Installing
- Front Interior Lamp with Roof Electronics Control Module, from 09.07, Removing and Installing
- Front Interior Lamp Bulbs, Replacing
- Front Reading Lamp Bulbs, Replacing
- Front Ambient Lighting LED, Removing and Installing
- Rear Interior/Reading Lamps with Rear Roof Module Control Head, through 08.07, Removing and Installing
- Rear Interior Lamp Bulb, through 08.07, Replacing
- Rear Reading Lamp Bulb, through 08.07, Replacing
- Rear Interior/Reading Lamps with Rear Roof Module Control Head, from 09.07, Removing and Installing
- Rear Interior Lamp Bulb, from 09.07, Replacing
- Rear Reading Lamp Bulb, from 09.07, Replacing
- Rear Ambient Lighting LED, Removing and Installing
- Illuminated Rear Vanity Mirror, Removing and Installing
- Rear Vanity Mirror Lamp, Removing and Installing
- Front Center Console Lamp, Removing and Installing
- Glove Compartment Lamp, Removing and Installing
- Door Opener Lamp Bulb, Removing and Installing
- Interior Door Lighting Strip, Removing and Installing
- Door Safety and Entry Lamp, Removing and Installing
- Front Footwell Lamp, Removing and Installing
- Rear Footwell Lamp, Removing and Installing
- Luggage Compartment Lamps, Removing and Installing
- Lane Change Assistance
- Lane Change Assistance Warning Lamps, Removing and Installing
- Lane Change Assistance Control Modules, Removing and Installing
- Heated Steering Wheel
- Trailer Hitch
- Towing Recognition Control Module, Removing and Installing
- Relay and Fuse Carriers
- Component Protection
- Left Instrument Panel Fuse Holder, Removing and Installing
- Left CAN Cut-Off Connector, Removing and Installing
- Left Door Cut-Off Connector, Disconnecting
- Vehicle Electrical System Control Module, Removing and Installing
- Relay and Fuse Carrier behind Left Instrument Panel, Removing and Installing
- Driver Side Electronics Box, Removing and Installing
- Right Instrument Panel Fuse Holder, Removing and Installing
- Right CAN Cut-Off Connector, Removing and Installing
- Right Door Cut-Off Connector, Disconnecting
- Main Fuse Carrier, Right A-Pillar, Removing and Installing
- Relay Carrier in Front Right Footwell, Removing and Installing
- Vehicle Electrical System Control Module 2, Removing and Installing
- Fuse Holder in Left of Luggage Compartment, Removing and Installing
- Right Luggage Compartment Relay and Fuse Carrier, Removing and Installing
- Heated Windshield Control Module, Removing and Installing
- Front Door Ambient Lighting Voltage Converter, Removing and Installing
- Rear Door Ambient Lighting Voltage Converter, Removing and Installing
- Plenum Chamber E-Box, Removing and Installing
- Relay and Fuse Carrier in Plenum Chamber E-Box, Removing and Installing
- Contact Housings and Connectors, Repairing
- Contact Surfaces, Cleaning with Contact Surface Cleaning Set VAS 6410
- Antenna Wires, Repairing
- Fiber Optic Cable
- Safety Precautions
- Lead-Acid Battery, Safety Precautions
- Lead-Acid Battery without Visual Indicator
- Central Venting System
- Lead-Acid Battery without Visual Indicator, Checking
- Battery Electrolyte Level, Checking
- Battery Specific Gravity, Measuring in All Cells
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Battery Post and Terminal, Handling Instructions
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Charging
- Totally Discharged Batteries, Charging
- Battery, Quick Charging
- Battery, Support Mode with Midtronics Battery Maintainer PSC-550 or Midtronics Battery Maintainer CXC-2115
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- Cruise Control System, Activating and Deactivating
- Washer Hose Couplings
- Washer Hoses, Repairing
- Smooth Hoses, Repairing
- Corrugated Hoses, Repairing
- HID Headlamps, Safety Precautions
- Anti-Theft Immobilizer, without Access/Start Control Module
- Faulty Transponder or Lost Key
- Induction Coil, Replacing
- Heated Steering Wheel
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Secondary Lock
- Primary Lock
- Primary Connector with Round Terminal Connector Systems
- Primary Connector with Flat Terminal Connector Systems
- Primary Connector with Special Connector Systems
- Antenna Wires, Repairing
- Fiber Optic Cable
- Fiber Optic Cables, Repairing
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information 2
- Waveforms - Injector Pattern Tutorial - General Information 2
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- Contact corrosion!
- Safety precautions
- Rules for cleanliness
- Fuel tank, emptying
- Fuel tank with attachments, removing and installing
- Checking voltage supply
- Checking current draw
- Left fuel delivery unit with Transfer Fuel Pump (FP) G6 , removing and installing
- Removing
- Installing
- Fuel Pump (FP) G23 (right), checking electrical
- Right fuel delivery unit with Fuel Pump (FP) G23 , removing and installing
- Fuel pump, vehicles with MPI engine and fuel return line, checking delivery quantity
- Fuel pump (vehicles with MPI engine without fuel return line), checking delivery quantity
- Fuel pump (vehicles with 8-cyl. FSI engine), checking delivery rate
- Fuel pump (vehicles with 10-cyl. engine (Audi S8)), checking delivery rate
- Left suction jet pump, removing and installing
- Right suction jet pump, removing and installing
- Fuel Level Sensor G , checking (left lever-type sensor)
- Fuel Level Sensor G (left lever-type sensor), removing and installing
- Fuel Level Sensor 2 G169 , checking (right lever sensor)
- Fuel Level Sensor 2 G169 (right lever sensor), removing and installing
- Fuel Level Sensor 3 G237 , checking (left tubular sensor)
- Fuel Level Sensor 3 G237 (left tubular sensor), removing and installing
- Fuel Level Sensor 4 G393 (right tubular sensor), checking
- Fuel Level Sensor 4 G393 (right tubular sensor), removing and installing
- Fuel filter for vehicles without auxiliary heater, removing and installing
- Fuel filter for vehicles with auxiliary heater, removing and installing
- Fuel filter for vehicles without fuel system return line, removing and installing
- Evaporative emissions (EVAP) canister, removing and installing
- Leak detection system
- Checking fuel supply and tank ventilation systems for leaks
- Leak Detection Pump (LDP) V144 , removing and installing
- Evaporative Emission (EVAP) Canister Purge Solenoid Valve N115 , removing and installing
- Accelerator pedal module with Throttle Position (TP) sensors, removing and installing
- Kick down switch F8 , removing and installing
- Equipment
- Function
- Available functions
- Safety precautions
- Basic Setting
- End Output
- Climatronic Control Module J255 , coding
- Read Measuring Value Block
- Read measuring value block (Climatronic Control Module J255)
- List of available display group numbers "001" to "019"
- Explanatory notes for compressor shut-off conditions in display group "002"
- List of available display group numbers "020" to "039"
- Coding information from control modules for seat ventilation (optional equipment)
- List of available display group numbers "040" to "050"
- Explanatory notes on code "1" (optional equipment)
- Explanatory notes on code "2" (country version and vehicle model)
- Explanatory notes on code "3" (rear seat heating/rear seat ventilation, seat covers and window glass)
- Display groups front for Climatronic Control Module J255 which are not currently not intended for service use
- Reading measured value block (Rear A/C Control Head (Climatronic) E265)
- List of available display group numbers "001" to "007" ("008")
- Display in display groups "006" to "008" for vehicles manufactured until November 2002 (gradual conversion)
- Adaptation procedure in the various adaptation channels
- A/C System, electrical checks
- Heated seats, checking
- Rear footwell auxiliary heater (where applicable), checking
- Heated Windshield Z2 , checking
- A/C Refrigerant Circuit
- A/C refrigerant circuit, safety measures
- A/C refrigerant circuit, evacuating
- A/C refrigerant circuit, repairs
- Painting work on vehicles with air conditioner
- A/C Refrigerant Circuit, general notes
- A/C Refrigerant Circuit, servicing
- Exploded view of components
- High Pressure Sensor G65 , removing and installing
- Pressure signal of High Pressure Sensor G65 , checking
- Refrigerant circuit O-rings
- Removing compressor from bracket and installing in vehicles with 8-cyl. MPI engine
- Compressor, removing from bracket and reinstalling
- A/C Compressor Regulator Valve N280 cut-in signal, checking
- Belt pulley, replacing (Version "1")
- A/C compressor pulley, removing from compressor and re-installing (Version "1")
- A/C compressor pulley, replacing (Version "2")
- A/C compressor pulley, removing from compressor and re-installing (Version "2")
- A/C compressor pulley, removing and installing (Version "2")
- Components for control and regulation of air conditioner not located in passenger compartment
- Dust and pollen filter, removing and installing
- Dust and pollen filter with activated charcoal filter element
- A/C system evaporator, cleaning using Ultrasonic HVAC Cleaning System VAS 6189
- Possible causes of odor
- Evaporator, cleaning
- Removing and installing
- Air Quality Sensor G238 , checking
- Checking
- Removing
- Installing
- Air Flow Flap Motor V71 with Back Pressure Flap Motor Position Sensor G113 , removing and installing
- Fresh Air Intake Duct Temperature Sensor G89 removing and installing
- Recirculation Flap Motor V113 removing and installing
- Cover with recirculated-air flap, removing and installing
- Fresh Air Blower V2 , removing and installing
- Pump/valve unit, removing and installing
- Pump valve unit, replacing
- Components for control and regulation of air conditioner located in passenger compartment
- Left Center Vent Motor V110 , removing and installing
- Right Center Vent Motor V111 , removing and installing
- Center Outlet Temperature Sensor G191 , removing and installing
- Sunlight Photo Sensor G107 , removing and installing
- Interior Temperature Sensor Fan V42 , removing and installing
- Climatronic Control Module J255 , removing and installing
- Climatronic Control Module J255 , removing
- Left Rear Footwell Heater Z42/Right Rear Footwell Heater Z43 , removing and installing
- Left Rear Center Console Temperature Sensor G311 and Right Rear Center Console Temperature Sensor G312 removing and installing
- Left Rear Warm/Cold Flap Air Outlet Motor V220 , removing and installing
- Right Rear Warm/Cold Flap Air Outlet Motor V221 , removing and installing
- Rear A/C Control Head (Climatronic) E265 , removing and installing
- Removing, checking
- Air conditioner unit components located in passenger compartment
- Defroster Flap Motor V107 removing and installing
- Left Front Defrost/Upper Body Shut-off Flap Motor V200 removing and installing
- Right Front Defrost/Upper Body Shut-off Flap Motor V199 removing and installing
- Left Footwell Flap Motor V108 , removing and installing
- Right Footwell Flap Motor V109 , removing and installing
- Temperature Regulator Flap Motor V68 , removing and installing
- Left Vent Temperature Sensor G150 , removing and installing
- Right Vent Temperature Sensor G151 , removing and installing
- Evaporator Vent Temperature Sensor G263 , removing and installing
- Left Rear Air Outlet Motor V218 and Right Rear Air Outlet Motor V219 , removing and installing
- Heater Core, removing and installing
- Air distribution system, block diagram
- Air routing and air distribution in passenger compartment
- A/C cooling output, checking
- Measures to be taken in the event of temperature increase downstream of evaporator
- A/C system heat output and pump valve unit, checking
- Servicing refrigerant circuit
- Refrigerant lines, disconnecting and connecting at compressor
- A/C compressor, removing and installing (basic guidelines)
- Compressor, removing from bracket and re-installing - vehicles with 12-cyl. engine
- Compressor, removing and installing - vehicles with 10-cyl. engine (Audi S8)
- Compressor drive unit, checking, replacing
- Compressor drive shaft, loosening
- Drive plate with overload protection, removing and installing
- Attaching
- Drive plate with overload protection, checking run-out and adjusting
- Drive plate, removing from compressor and installing
- Drive plate with roller bearing, removing and installing
- Detaching refrigerant lines from condenser/re-attaching
- Detaching
- Condenser, removing and installing
- Restrictorss, removing and installing
- Accumulator, removing and installing
- Disconnecting
- Connecting
- Heating and A/C unit, removing and installing
- Covers in plenum chamber, fresh-air blower and evaporator, removing and installing
- Sealing connection of covers
- Oil change service
- Contact corrosion
- All switches, all electrical components, all displays and other operating elements: Checking function
- Final drive (automatic transmission): Check oil level, add oil if necessary
- Wheel bolts
- Battery manager: Deactivate transport mode
- Battery with magic eye
- Battery sealing plugs
- Battery, disconnecting and connecting
- Battery level, read out with Guided Fault Finding
- Tires, checking
- Checking tire wear pattern
- Check tread depth
- Spare wheel
- Brake pads: Thickness, checking
- Digital TV Tuner: Assign remote control key fob
- Vehicle level, adjusting
- Check vehicle key function
- Front axle joints: Seal boots, checking play and attachment
- Telephone/Telematics control module, initializing
- A/C system: Check function, set temperature to 72 F (22 C)
- Cooling system: Check freeze protection, add coolant, if necessary
- Ribbed belt, W12 (6.0 MPI) and 10-cylinder gasoline engines (5.2 FSI), checking
- Ribbed belt, removing and installing
- Instrument cluster: Adapt language version
- 8-cyl. gasoline engines
- 10-cyl. gasoline engines (5.2 FSI)
- W12 gasoline engine
- Engine cover, removing
- V8 5-valve gasoline engines
- 10-cyl. gasoline engine (5.2 FSI)
- Engine oil: Fill
- Engine: Oil level, checking
- Navigation: Eject button, unlocking
- Headlamp washer system: Check spray jet setting.
- Windshield spray jet setting
- Windshield wiper blades: Park position and checking for damage
- Wiper blade, replacing
- Sunroof: Check function, clean guide rails and spray on grease spray
- Tank filling table
- Ellipsoid headlamps, adjusting
- Headlamps, adjusting (gas-discharge lamps)
- Oil quality, adapting
- Maximum values, adapting
- Telematics: Emergency battery, replacing
- Transport mode, deactivating
- Winter tires from factory
- Timing belt: replacing (V8 gasoline engines)
- Clock, setting
- V8 gasoline engines
- V10 gasoline engines
- Headlights: Aiming using Hella Universal Beamsetter IV
- Vehicle, lifting
- Suspension blocks, installing
- Tow starting/towing Some engines listed below are for European models and are not applicable to the North American market.
- General Repair Notes
- Vehicle jack mode on vehicles with air spring suspension
- O-rings, gaskets, seals
- Securing rings
- Nuts, bolts
- Driveshaft (Audi A4 and Cabriolet, Audi A6), removing and installing
- Driveshaft (Audi A4 and Cabriolet, Audi A6), removing
- Installing driveshaft - Audi A4 and Cabriolet, Audi A6
- Driveshaft, removing and installing - Audi A8
- Removing driveshaft - Audi A8
- Installing driveshaft - Audi A8
- Driveshaft, disconnecting from rear final drive
- Driveshaft, securing to rear final drive
- Measure radial play at flange/driveshaft and mark
- Axle oil in rear final drive, checking
- Rear final drive, removing and installing
- Rear final drive (Audi A4 and Cabriolet, Audi A6), removing and installing
- Installing rear final drive - Audi A4 and Cabriolet, Audi A6
- Rear final drive (Audi A8), removing and installing
- Installing rear final drive - Audi A8
- Oil seals for flange shafts, replacing
- Sealing ring for flange/driveshaft (rear final drive installed), replacing
- Technical Data
- Chassis
- Oil- and Gas-Filled Component Disposal
- Air Spring Damper, Emptying
- Pressure Reservoir, Emptying
- Power Steering Gear, Emptying
- Shock Absorbers
- Shock Absorbers, Checking on Shock Tester
- Threshold
- Positioning Vehicle on Hoist and Wheels
- Front Axle
- Contact Corrosion
- Longitudinal Member Threads, Servicing
- Wheel Bearing Housing, Raising to Control Position
- Working after adjusting control position
- Mounting Bracket, Upper Control Arm and Air Spring Damper
- Air Spring Damper, Removing and Installing
- Removing
- Installing
- Air Spring Damper, Filling
- Air Spring Damper, Servicing
- Boot, Correcting Pressure Points
- Mounting Bracket, Removing and Installing
- Front Upper Control Arm, Removing and Installing
- Upper Control Arms, Removing and Installing
- Upper Control Arm Bearing, Replacing
- Subframe, Engine Carrier, Coupling and Stabilizer Bar
- Subframe, Removing and Installing
- Coupling, Removing and Installing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Guide Link and Level Control System Sensor
- Track Control Arm, Removing and Installing
- Control Arm Bearing, Replacing
- Guide Link, Removing and Installing
- 65 mm Guide Link Bearing, Replacing
- 75 mm Guide Link Bearing, Replacing
- Level Control System Sensor, Removing and Installing
- Wheel Bearing Housing and Wheel Bearing Unit
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing Unit, Removing and Installing
- Wheel Bearing, Replacing
- Crossmembers and Tower Brace
- Crossmembers, Removing and Installing
- Tower Brace, Removing and Installing
- Driveshaft
- Driveshaft, Removing and Installing
- Grease quantity and type
- Outer CV joint, installing
- Rear Axle
- Wheel Bearing Housing, Raising to Control Position to Tighten Bolts
- Subframe, FWD
- Subframe, FWD, Removing and Installing
- Subframe, AWD
- Subframe, AWD, Removing and Installing
- Rear Suspension Components
- Transverse Link, Removing and Installing
- Tie Rod, Removing and Installing
- Coupling Rod, Removing and Installing
- Trapezoidal Control Arm, Removing and Installing
- Air Spring Damper and Wheel Bearing
- Tighten clamping sleeve on the air spring damper
- Replacing slide washer, 85 mm diameter wheel bearings
- Replacing slide washer, 92 mm diameter wheel bearings
- Wheel Hub, Installing in 85 mm or 92 mm Wheel Bearing
- Wheel Bearing Housing Bonded Rubber Bushing, Replacing
- Driveshaft with 88 mm CV Joint, Servicing
- Driveshaft with 100 mm and 108 mm CV Joint
- Driveshaft with 100 mm CV Joint, Servicing
- Self Leveling Suspension
- Suspension Levels
- Vehicle Level, Adjusting
- Vehicle Lift Mode
- Trailer Mode
- Cargo Mode
- VAS 5051A, Connecting and Selecting Functions
- Level Control System, Servicing
- Front Level Control System Sensor, Removing and Installing
- Rear Level Control System Sensor, Removing and Installing
- Front Body Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Level Control System Control Module, Removing and Installing
- Level Control System Control Module, Programming
- Body Acceleration Sensor, Checking Acceleration Signal
- System, Venting or Filling
- Control Position, Programming
- Pneumatic Level Control System
- Connector Piece, Replacing
- Solenoid Valve Block, Removing and Installing
- Air Supply Unit, 8-Cylinder, Removing and Installing
- Connector system
- Air Supply Unit, 10- and 12-Cylinder, Removing and Installing
- Pressure Reservoir, Removing and Installing
- Tire Pressure Monitoring System, Servicing
- Tires, Changing
- Metal Valve Body, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Front Receiver Antennas, Removing and Installing
- Rear Receiver Antennas, Removing and Installing
- Tire Pressure Monitoring System, Usage
- PR Number Explanations
- Rim Run-Out Compensation
- Steering Rack, Checking Center Position
- Front Axle Camber, Centering
- Front Axle Toe, Adjusting
- Raising Vehicle with 1BK, 2MA and 2MB Suspension
- Adaptive Cruise Control
- Adaptive Cruise Control Sensor, Removing and Installing
- Lane Assist
- Directional Stabilization Assistance Control Module and Lens Screen, Removing and Installing
- Steering Wheel
- Steering Wheel with Airbag, Removing and Installing
- Steering Column
- Steering Column, Removing and Installing
- Steering Wheel, Adjusting Position Electrically
- Steering Column, Checking for Damage
- Entry Assistance, with Memory Seats
- Power Steering Gear
- Centering Steering
- Power Steering Gear, Servicing
- Power Steering Gear, Adjusting
- Tie Rod Ball Joint, Removing and Installing
- Tie Rods, Removing and Installing
- Steering System, Checking Oil Level, Bleeding and Checking for Leaks
- Power Steering, V8, Checking Oil Level
- Power Steering, V10 and W12, Checking Oil Level
- Steering System, Bleeding after Reconstructing
- Steering System, Checking for Leaks
- Power Steering Pump, Hydraulic Lines and Reservoir, 8-Cylinder MPI
- Power Steering Pump, 8-Cylinder MPI, Checking Delivery Pressure
- Power Steering Pump, 8-Cylinder MPI, Removing and Installing
- Vane pump, removing and installing
- Power Steering Pump, Hydraulic Lines and Reservoir, 8-Cylinder FSI
- Power Steering Pump, 8-Cylinder FSI, Checking Delivery Pressure
- Power Steering Pump Gasket and O-Ring, 8-Cylinder FSI, Replacing
- Power Steering Pump, Hydraulic Lines and Reservoir, 10-Cylinder
- Power Steering Pump, 10-Cylinder, Checking Delivery Pressure
- Power Steering Pump Gasket and O-Ring, 10-Cylinder, Replacing
- Power Steering Pump, Hydraulic Lines and Reservoir, 12-Cylinder
- Insert reservoir in bracket
- Power Steering Pump, 12-Cylinder, Checking Delivery Pressure
- Wheels, Tires, and Tire Pressure Monitoring
- Alloy Wheels
- Wheels, Changing and Mounting Notes
- Changing Wheels
- Wheel mounting
- Changing Tires
- Metal Valve Body, Removing and Installing
- Fault Finding
- Tire Wear and Service Life
- Driving Style
- Tire Air Pressure
- Heel-and-Toe Wear
- Balancing Wheels on Stationary Balancing Machine
- Wheel and Tire Radial and Lateral Run-Out
- Checking lateral run-out
- Radial and Lateral Run-Out of Wheel, Checking
- Matched Mounting
- Tire Flat Spots from Standing
- Vehicle Pulls to One Side
- Vehicle Pulls to One Side, Correcting
- Tire Damage
- Tire Information
- Tires with Emergency Running Characteristics PAX, Lettering on Side Wall
- Tire Aging
- Tires, Replacing
- Light Alloy Wheels, Care and Treatment
- Wheels, Rotating
- Vehicles with Break-Down Kit
- Tire, Removing
- New Tire, Mounting
- Tires with Rim Protector
- Tire Pressure Monitoring System
- Tires with Emergency Running Characteristics, Self-Supporting Tire
- Tires with Emergency Running Characteristics, PAX