Home/Audi/A8/Audi A8 D3 (2002-2005)/Repair manual/On Board Diagnostic (OBD) - Abs/edl/asr/Indicator light functions, overview

Contents

Wiring diagrams Section: On Board Diagnostic (OBD) - Abs/edl/asr

General

Function

VAG1551 Scan Tool (ST), connecting and entering address word

Selecting functions

Requirements

End Output

Bus

CAN

The DTC table indicates the bus must be checked

Is there is a malfunction?

While checking the bus lines, differentiate between the following two situations

Three or more control modules are communicating across a "two-line bus system"

Example 1

Example 2

Example 3

Reconnecting battery, procedures

Basic setting for the up and down power windows function

Setting the clock

Adaptation of throttle valve control module

Application notes

Road test

If there is a complaint, a pin-pointed troubleshooting must be carried out

Test requirements

Technical publications required

Function of Bosch ABS 5.0 Series

Electronic brake force distribution

Table of warning light functions

Function of On Board Diagnostic (OBD)

Technical data of On Board Diagnostic (OBD)

Check control module version

Check DTC memory

Encode control module

Read measured value block

Test table, Display group 1

Test table, Display group 3

Electrical testing

Function of Bosch ABS 5.3 Series

Two communications systems are in use

Output Diagnostic Test Mode (DTM)

Test table, Display group 2

Note on DTC table

Electronic Stabilization Program (ESP)

Safety measures and troubleshooting basics

Test drive

Test conditions

Technical information required

ESP function

EBD

ESP

Examples

Hydraulic pump for traction control -V156- and the sensor for brake pressure -G201

Steering Angle Sensor -G85

Airbag spiral spring/return spring with slip ring -F138

Sender for rotation rate -G202

Sensor for transverse acceleration -G200

The parking brake switch

The ABS solenoid valve relay -J106- and the ABS return flow pump relay -J105

ABS/ESP Control Module CAN Bus

Indicator light functions, overview

On Board Diagnostic (OBD), specific functions

On Board Diagnostic (OBD), technical data

Control module versions (scan tool function 01), checking

DTC table

Basic setting (scan tool function 04)

Login procedure (scan tool function 11)

Display group 1: Zeroing the steering angle sensor -G85

Display group 2: Activating hydraulic pump for traction control -V156

Display group 3: Activating ESP driving test

Output Diagnostic Test Mode (DTM) (scan tool function 03)

Code Control Module (scan tool function 07)

Measuring Value Block (scan tool function 08), reading

Test table: display group 1 (001)

Electrical test table

Safety precautions

On Board Diagnostic (OBD) functions

DTC table for tire pressure monitoring

Performing coding

Code: 20129

Adaptation

Tire pressure monitoring system, operating for the first time

All sections

Indicator light functions, overview Audi A8 D3

On Board Diagnostic (OBD) - Abs/edl/asr 10 illustrations ~155 words

Indicator light functions, overview

First switch the ignition on, and note whether the indicator lights in the instrument cluster lights up. The status of the ABS warning light -K47-, the red brake warning symbol, and the traction control indicator light -K86- provide an initial indication of the current condition.

The red symbol for "Brake system malfunction" appears in the display of the driver information system.

Scheme 235

Scheme 235

Scheme 235

The ABS warning light -K47- and the traction control indicator light -K86- are located below the display.

Scheme 236

Scheme 236

Scheme 236

Scheme 237

Scheme 237

Scheme 237

Scheme 238

Scheme 238

Scheme 238

Scheme 239

Scheme 239

Scheme 239

Scheme 240

Scheme 240

Scheme 240

Scheme 241

Scheme 241

Scheme 241

Scheme 242

Scheme 242

Scheme 242

Scheme 243

Scheme 243

Scheme 243

Scheme 244

Scheme 244

Scheme 244

For Electrical testing, see «ELECTRICAL TESTING»(/audi/a8/d3-2002-2005/remont/warning-system/#on-board-diagnostic-obd-absedlasr) .
To check DTC memory, see «DIAGNOSTIC TROUBLE CODE (DTC) MEMORY (SCAN TOOL FUNCTION 02), CHECKING»(/audi/a8/d3-2002-2005/remont/warning-system/#on-board-diagnostic-obd-absedlasr)
For "read measuring value block", see «MEASURING VALUE BLOCK (SCAN TOOL FUNCTION 08), READING»(/audi/a8/d3-2002-2005/remont/warning-system/#on-board-diagnostic-obd-absedlasr__measuring-value-block-scan-tool-function) .
To check basic setting, see «BASIC SETTING (SCAN TOOL FUNCTION 04)»(/audi/a8/d3-2002-2005/remont/warning-system/#on-board-diagnostic-obd-absedlasr__basic-setting-scan-tool-function-04) .