Home ReviewsRefund
Home/Audi/A6/Audi A6 C5 (1997-2001)/Repair manual/On Board Diagnostic (OBD) - Central Locking System, Memory Seats, Ultrasonic Interior Monitor/Implementing function "04 - Basic setting"
Contents Wiring diagrams Section: On Board Diagnostic (OBD) - Central Locking System, Memory Seats, Ultrasonic Interior Monitor All sections

Implementing function "04 - Basic setting" Audi A6 C5

On Board Diagnostic (OBD) - Central Locking System, Memory Seats, Ultrasonic Interior Monitor 6 illustrations ~151 words

Implementing function "04 - Basic setting"

Indicated on display

Scheme 220

Scheme 220: Implementing function "04 - Basic setting"
Scheme 220: Implementing function "04 - Basic setting"
  1. Press buttons -0- and -4-.

Indicated on display

Scheme 221

Scheme 221
Scheme 221
  1. Confirm entry with -Q- button.

Indicated on display

Scheme 222

Scheme 222
Scheme 222
  1. Press buttons -0-, -0- and -1-.

Indicated on display

Scheme 223

Scheme 223
Scheme 223
  1. Confirm entry with -Q- button.

Indicated on display

Scheme 224

Scheme 224
Scheme 224
  1. This concludes basic setting.
  2. Press --> button.

Indicated on display

Scheme 225

Scheme 225
Scheme 225
  1. Then check display value 4 in measuring value block 002. Display must show mean counter value (32767).
  2. Check basic setting as follows
  3. Move seat backrest to rear as far as it will go.
  4. Press memory button and one of the personalized buttons (e. g. memory position 1).
  5. Then press memory position button selected above (e.g.: 1) again with driver's door open. Backrest moves to rear stop, leaving a safety clearance with respect to rear seat bench (leg room for rear passenger).