Home ReviewsRefund
Home/Audi/A6/Audi A6 C5 (1997-2001)/Repair manual/On Board Diagnostic (OBD) - 5 Spd. Automatic Transmission 01v/Code Control Module (scan tool function 07)
Contents Wiring diagrams Section: On Board Diagnostic (OBD) - 5 Spd. Automatic Transmission 01v All sections

Code Control Module (scan tool function 07) Audi A6 C5

On Board Diagnostic (OBD) - 5 Spd. Automatic Transmission 01v 11 illustrations ~511 words

Code Control Module (scan tool function 07)

The Transmission Control Module (TCM) can be coded.

Procedure

  1. Connect VAS5051 tester or VAG1551 scan tool and select Transmission Control Module (TCM) using "address word" 02. See «VAS5051 TESTER OR VAG1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS»(/audi/a6/c5-1997-2001/remont/automatic-trans/#on-board-diagnostic-obd-5-spd-automatic-transmission-01v__vas5051-tester-or-vag1551-scan-tool) .

Ignition must remain switched on for this.

Indicated on display

Scheme 771

Scheme 771
Scheme 771

Print out control module identification

  1. Switch on printer by pressing the print button (indicator lamp in button lights up).
  2. Press buttons -0- and -1-.
  3. Press -Q- button to confirm input.

Indicated on display

Scheme 772

Scheme 772
Scheme 772

Control module identification is displayed

Depending on the control module version (software version), control module may indicate a different identification than shown in this example. Allocation of the control module

See Parts catalog.

Clarification of display

  1. 4B0927156BT: Part number
  2. AG5 01V: Automatic Transmission, 5-speed 01V
  3. 2,8l 5V: Engine type
  4. USA: Market, USA and Canada
  5. 1416: 14 = software version, 16 = data version
  6. Coding 00002: Coding (see «CODING TABLES»(/audi/a6/c5-1997-2001/remont/automatic-trans/#on-board-diagnostic-obd-5-spd-automatic-transmission-01v) )
  7. WSC 00000: Factory identification of VAG1551, with which the last coding was performed
  1. Press --> button.

Transmission control module identification can only be printed out when printer is switched on.

Indicated on display

Scheme 773

Scheme 773
Scheme 773

Note. Read Transmission Control Module (TCM) identification to determine which transmission/engine combination is present in this particular case, see clarification above. Then use coding table to determine whether the appropriate code is entered.

  1. Press buttons -0- and -7-. This selects "Coding Control Module", function 07.

Note. Coding can only be performed with ignition on and selector lever in position "P" or "N". Accelerator pedal must be in idle position. Vehicle must be stationary and engine must not be started.

Indicated on display

Scheme 774

Scheme 774
Scheme 774
  1. Press -Q- button to confirm input.

Indicated on display

Scheme 775

Scheme 775
Scheme 775
  1. Enter code

Note. Use control module identification to retrieve appropriate code from CODING TABLES . Enter it into tester. The Dynamic Shifting Program (DSP) should remain on at all times if possible.

  1. Press -Q- button to confirm input.

Note. DTC memory in the control module is automatically erased following coding.

  1. Press --> button.

Indicated on display

Scheme 776

Scheme 776
Scheme 776
  1. Check control module version (press buttons -0- and -1-), confirm input with Q button and check coding. See «ON BOARD DIAGNOSTIC (OBD), INITIATING»(/audi/a6/c5-1997-2001/remont/automatic-trans/#on-board-diagnostic-obd-5-spd-automatic-transmission-01v__output-diagnostic-test-mode-dtm-scan) .

When indicated on display: An attempt was made to enter a coding that is not valid or unrecognized by the control module.

Scheme 777

Scheme 777
Scheme 777

Note. If an incorrect coding is entered, the control module will retain the old coding.

Indicated on display

Scheme 778

Scheme 778
Scheme 778

Note. A control module identification that has been incorrectly entered is only indicated alongside the old coding for older VAG1551 tester cards.

When indicated on display

Scheme 779

Scheme 779
Scheme 779

An attempt was made to perform coding in an unauthorized coding condition, for example, with vehicle in a driving mode.

Scheme 780

Scheme 780: For vehicles without E-gas
Scheme 780: For vehicles without E-gas
  1. To determine if engine/transmission combination is equipped with E-Gas, see «CODE LETTERS, ENGINE/TRANSMISSION APPLICATIONS, RATIOS, EQUIPMENT»(/audi/a6/c5-1997-2001/remont/automatic-trans/#overhaul-01v) .

Scheme 781

Scheme 781: For vehicles with E-gas
Scheme 781: For vehicles with E-gas
  1. To determine if engine/transmission combination is equipped with E-Gas, see «CODE LETTERS, ENGINE/TRANSMISSION APPLICATIONS, RATIOS, EQUIPMENT»(/audi/a6/c5-1997-2001/remont/automatic-trans/#overhaul-01v) .