Technical data
| Engine identification | ATQ (2.8 L / 5V/ 147 kW-engine) | |
|---|---|---|
| Idle speed (Engine speed cannot be adjusted, it is regulated by idle stabilization.) | ||
| Front wheel drive | 720 to 820 RPM | |
| All wheel drive | 670 to 770 RPM | |
| Engine speed (RPM) limitation via fuel injector shut -off | About 6800 RPM | |
| Fuel pressure at idle speed | ||
| Vacuum hose connected | 3.2 to 3.8 bar | |
| Vacuum hose disconnected | 3.8 to 4.2 bar | |
| Residual pressure after 10 min. | ||
| Cold engine | About 2.2 bar positive pressure | |
| Warm engine | About 3.0 bar positive pressure | |
| Fuel injectors | ||
| Injection stream | Dual -hole nozzle / same for all injectors | |
| Injection quantity (30 s) | 90 to 125 ml. | |
| Resistance (room temperature) (1) | 13.5 to 15.5 ohms | |
| (1) With an engine at normal operating temperature, the resistance of the fuel injectors increases by approx. 4 to 6 ohms | ||
| (1) | With an engine at normal operating temperature, the resistance of the fuel injectors increases by approx. 4 to 6 ohms |
TECHNICAL DATA