Home/Audi/A6/Audi A6 С6 (2004-2008)/Repair manual/Maintenance Procedures/Engine oil: Fill

Contents

Wiring diagrams Section: Maintenance Procedures

Engine overview

Delivery inspection

Oil change service

Inspection service

All switches, all electrical components, all displays and other operating elements: Checking function

Automatic transmission

Continuously Variable Transmission (CVT)

Battery manager: Deactivate transport mode

Battery level, read out with Guided Fault Finding

Battery with magic eye

Battery sealing plugs

Tires, checking

Check tread depth.

Spare wheel

Brake fluid, changing

Vehicles with manual transmission

Continued for all vehicles

Table - Sequence / quantity of brake fluid

Brake system: Visual inspection for leaks and damage

Brake pads: Thickness, checking

Brake fluid level, dependent on lining wear: Check

Digital TV Tuner: Assign remote control key fob

Check vehicle key function

DTC memory, interrogating with Vehicle Diagnosis, Testing and Information System VAS 5051/5052

Noise insulation, removing

Front axle joints: Seal boots, checking play and attachment

Power steering, checking oil level

Calibrate rearview mirror with compass

Ribbed belt, V8 4.2 and V10 5.2, checking tension and condition

Ribbed belt: Replacing

A/C system: Check function, set temperature to 72 F (22 C)

Cooling system: Check freeze protection, add coolant, if necessary

Air cleaner: Clean air filter housing and replace filter

Engine (from above and below) and engine compartment: Visual inspection for leaks and damage

Engine cover, installing

Engine oil: drain, replace oil filter

10-cyl. gasoline engine (5.2 FSI)

Engine oil: Fill

Engine: Oil level, checking

Navigation: Eject button, unlocking

Interior monitoring, checking function

Perform test drive

Wheel bolts

Correct wheel installation

Windshield washer system: Checking nozzle setting, adjusting nozzles if necessary

Headlamp washer system: Check spray jet setting

Headlamps: Check setting, adjust if necessary

Check and adjustment conditions

Headlamps, checking adjustment (with new test screen without 15 ° setting line)

Fog lights in main headlights

Fog lights in bumper

Other additional headlamps

Windshield/headlamp wiper system: Filling with fluid

Windshield wiper blades: Park position and checking for damage

Headlights: Aiming using Hella Universal Beamsetter IV

Door locks, lock buttons and child safety locks: Checking

Snow screen, cleaning

Service display, resetting

Oil quality, adapting

Maximum values, adapting

Adapting language

Dust and pollen filter: Replacing

Removing

Installing

Removing front axle bumper protection devices

Removing rear axle bumper protection devices

Underbody, visual inspection for damage

Transport mode, deactivating with Vehicle Diagnosis, Testing and Information System VAS 5051/5052

Plenum chamber water drain, checking and cleaning

Winter tires from factory

Timing belt: Replacing

Clock, setting

Spark plugs: Replacing

V8 and V6 gasoline engines

V10 gasoline engines

Type plate, Vehicle Identification Number (VIN), engine code

Suspension blocks, installing

Vehicle, lifting

Tow starting/towing

Vehicle checks within inspection and service framework

All sections

Engine oil: Fill Audi A6 С6

Maintenance Procedures ~110 words

Engine oil: Fill

Note. Please follow specified engine oil capacity and oil standards in the ELSA maintenance table.

Engines with turbocharger

After the engine oil and oil filter have been replaced, observe the following when first starting the engine

As long as the oil pressure warning light in the instrument panel insert flashes, the engine is only to run at idle. Do not touch the accelerator pedal! Bumping the accelerator pedal can damage the turbocharger or destroy it completely
The full oil pressure achieved and the engine can be accelerated only when the warning light extinguishes

All

Check engine oil level --> «Engine: Oil level, checking»(/audi/a6/6-2004-2008/remont/procedures/#maintenance-procedures__engine-oil-level-checking) .