Access/Start Authorization Button E408 , removing and installing Audi A6 С6

Access/Start Authorization Button E408 , removing and installing

Removing

1. On vehicles with automatic transmission, place selector lever in position "S".

1. Reach from bottom into recesses into recesses at Climatronic Control Module J255 (control head).
2. Pull Climatronic Control Module J255 (control head) out of mounting frame - arrows -.

Note. Electrical harness connectors do not need to be disconnected.

1. Remove gap cover above ashtray - arrow -.

1. Open front ashtray.
2. Remove insert of front ashtray.
3. Remove bolts - 1 - and - 2 -.
4. Release ashtray - 3 - using a screwdriver - arrow - , attach screwdriver at opening - 4 - to do so.

1. Remove housing of front ashtray.
2. Disconnect electrical harness connector, if present.

Scheme 277

1. Reach through opening of ashtray and press out Access/Start Authorization Button E408 - 1 - - arrow -.
2. Disconnect electrical harness connector.

Installing

Installation is performed in the reverse order of removal.

Tightening torque

Scheme 278

Removing

1. Place selector lever in position "N".

1. Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward - arrows -.
2. Fold selector lever boot upward.

1. Release retaining spring - 2 - and remove Selector Lever Transmission Range (TR) Position Display Y26 - 1 - - arrow -.
2. Disconnect electrical harness connector.

Installing

Installation is performed in the reverse order of removal.