Ignition key lock, checking Audi A6 С6

Ignition key lock, checking

1. To reach position "ignition on" , briefly turn ignition key lightly toward right.
2. Press brake pedal and hold.

1. It must be possible to shift selector lever out of position "P" without "catching" while locking button on selector lever handle is pressed.

1. Switch ignition off.

1. It should not be possible to remove the ignition key when selector lever is in any other position than "P".

1. Place selector lever in position "P".
2. Remove ignition key.

1. It must be possible to remove ignition key only in position "P".
2. Selector lever cannot be shifted out of position "P" with the locking button pressed and foot brake operated.

If ignition key removal lock does not function as described, check Access/Start Authorization Switch E415 using Vehicle Diagnostic, Testing and Information System VAS 5051 in "Guided Fault Finding" function.