Rear window, installing Audi A6 С6

Rear window, installing

1. After preparatory work has been performed, apply the adhesive.

1. Position complete surface of nozzle - 2 - onto window.
2. Arrow - indicates direction of application

Note. Cross-section thickness of adhesive bead - 1 - is determined by dimension of opening in nozzle tip and rate of application.

1. Apply adhesive sealing material all around, as shown in illustration.
2. Note distances to window edge.
3. Using two double suction cups, install rear window in window opening.

1. Center window along sides.

Distance to side window edge = 2 mm, adjust if necessary.

1. Spacing between window edge and roof frame must be 2 mm.
2. Observe minimum curing times.