SIDE INSTRUMENT PANEL VENT
Note. Removing and installing is identical for the left and right sides.
Special tools and workshop equipment required
- Hook 3438
Scheme 62
Note. The instrument panel vent has a hole on both sides for attaching the hook 3438.
Alternating between the sides, carefully remove the instrument panel vent -1- from the installation opening using the hook 3438.
Vehicles with illumination: Disconnect the connector on the instrument panel vent.
Install in reverse order of removal. Note the following
Note. Check the clips for damage or deformation and replace them if necessary.
When sliding the instrument panel vent into the installation opening, make sure the air duct engages correctly.
Press the instrument panel vent into the installation opening as far as the stop.