Home ReviewsRefund
Home/Audi/A4/Audi A4 B8 (2007-2012)/Repair manual/2.0l - Engine Assembly - Engine Code(s): Caeb (avant)/ENGINE, SECURING TO ENGINE STAND
Contents Wiring diagrams Section: 2.0l - Engine Assembly - Engine Code(s): Caeb (avant) All sections

ENGINE, SECURING TO ENGINE STAND Audi A4 B8

2.0l - Engine Assembly - Engine Code(s): Caeb (avant) 2 illustrations ~107 words

ENGINE, SECURING TO ENGINE STAND

Special tools and workshop equipment required

  1. Engine Sling 2024 A
  2. Shop Crane VAS 6100
  3. Engine and Transmission Holder VAS 6095
  4. Counter Hold Tool 10 - 201

Procedure

Insert the 10 - 201 to loosen the bolts.

Scheme 305

Scheme 305
Scheme 305
CAUTIONThe outer surface of the bearing flange at the drive plate could be damaged. Use a multipoint socket wrench with a shaft at least 40 mm long to loosen and tighten the drive plate bolts.

Remove the bolts and remove the drive plate.

WARNINGLoose engine support bridge components could cause an accident. Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

Hook the 2024 A to engine and to the VAS 6100.

Scheme 306

Scheme 306
Scheme 306

Note. To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

Secure the engine on the VAS 6095 during assembly work.