Home ReviewsRefund
Home/Audi/A4/Audi A4 B7 (2004-2009)/Repair manual/Exhaust/Tailpipes, Aligning
Contents Wiring diagrams Section: Exhaust All sections

Tailpipes, Aligning Audi A4 B7

Exhaust
  1. Check distance of end pipes at left and right to bumper: Dimension x left = dimension x right
  2. Loosen nut (arrow) of brace between exhaust pipes.
  3. Change the distance of the rear mufflers to each other.
  4. Tighten nut to 23 N.m.
  5. Check distances -y- and -z- of end pipes to bumper: Dimension y = greater than 20 mm Dimension z = 9 to 14 mm
  6. If necessary, check whether the exhaust system is installed tension-free. See «ALIGN EXHAUST SYSTEM TENSION-FREE (VEHICLES WITH FRONT WHEEL DRIVE)»(ref-213311-S38088963902005122900000) or «ALIGN EXHAUST SYSTEM TENSION-FREE (VEHICLES WITH ALL WHEEL DRIVE)»(ref-213311-S04843793412005122900000) .

More articles — Exhaust System, Emission Controls, Generic Scan Tool - 1.8L 5V Turbo, Amb