Home/Audi/A4/Audi A4 B7 (2004-2009)/Repair manual/Exhaust/Final Procedures

Contents

Wiring diagrams Section: Exhaust

All sections

Final Procedures Audi A4 B7

Exhaust

After repair work, the following work steps must be performed in the mentioned sequence

Check DTC memory. See «MODE 3: CHECK DTC MEMORY»(ref-213313-S17950412562005122900000) .
If necessary, erase DTC memory. See «MODE 4: RESET/ERASE DIAGNOSTIC DATA»(ref-213313-S07590062092005122900000) .
Generate readiness code. See «READINESS CODE, GENERATING»(ref-213313-S11964678882005122900000) . End diagnosis and switch ignition off.