Overhaul - 01V: Component Locations Audi A4 B5 facelift

Special Tools & Equipment

1. Depth gauge

Slide in converter hub through the sealing ring up to the first stop.

Rotate torque converter inward with light pressure, until the groove of the torque converter hub engages in the coupling plate of the pump wheel and the torque converter slides inward noticeably.

1. VAG1306 drip tray.

Shim Location

Note. Adjustment overview when replacing individual components of differential. (Scheme 126)

Scheme 126

Scheme 127

Scheme 128

Scheme 129

Scheme 130

Scheme 131

1. VW382/10 extension pin
2. VW385/1 measuring bar
3. VW385/2 centering disc
4. VW385/3 plastic piece
5. VW385/14 measuring rod
6. VW385/15 extension pin
7. VW385/17 magnetic plate
8. VW385/30 master gauge-adjustable
9. VW385/33 end gauge
10. VW387 dial gauge holder
11. VW388 measuring lever
12. VW401 thrust plate
13. VW402 thrust plate
14. VW408A punch
15. VW457 support channels
16. VW521/4 locking sleeve for ring gear
17. VW521/8 bushing for ring gear
18. VW540 holding fixture
19. 30-205 thrust pad
20. 2003/3 seal installer
21. 2052/2 assembly tool for drive pinion
22. 3005 thrust pad
23. 3028 retainer
24. 3062 thrust pad
25. 3253 wheel bearing assembly set with 3253/3 and 3253/4
26. 3304 retainer
27. Engine/transmission jack VAG1383A engine/gearbox jack
28. Dial gauge extension 30 mm
29. Dial gage
30. Torque gauge 0-600 Ncm (Scheme 128)- see scheme 82.