FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| Guide tube for Oil Dipstick | 5 | |
| Oil Cooler Cap | 25 | |
| Oil Drain Plug | 30 | |
| Oil Filter Cap | 25 | |
| Oil Filter Housing | ||
| Locking Bolt | 15 2 | |
| 23 2 | ||
| Oil Level Thermal Sensor | 8 | |
| Oil Pressure Line | 8 | |
| Oil Pressure Switch | 25 | |
| Oil Pump | 23 | |
| Oil Pump Drive Cover | 8 | |
| Oil Pump Housing | ||
| 10 1 | ||
| 23 1 | ||
| Thrust Washer | 10 | |
| 1 For bolt tightening clarification, refer to OIL PUMP ASSEMBLY OVERVIEW and see items -3 and 8- 2 For bolt tightening clarification, refer to OIL COOLER AND OIL FILTER HOUSING ASSEMBLY OVERVIEW and see items -5 and 6 | ||
Oil Pan - Tightening Specifications and Tightening Sequence
Tighten bolts in 3 stages as follows
Pre-tighten the bolts connect the oil pan to the cylinder block in a diagonal sequence to 5 Nm.
Tighten oil pan to transmission connection -arrows- bolts.
Tighten oil pan to cylinder block connection bolts diagonally to 12 Nm.
Note. Ignore -1-.