FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| Chain Tensioner | 9 | |
| Engine Oil Cooler | 23 | |
| Oil Baffle | 9 | |
| Oil Drain Plug 1 | 30 | |
| Oil Pan (Upper Section) | 9 | |
| Oil Pressure Switch | 20 | |
| Oil pump to upper oil pan | M6 | 9 |
| Oil pump to upper oil pan | M8 | 20 |
| 1 Always replace | ||
Oil Pan, Upper Section, Tightening Sequence
Tighten bolts in 3 stages in -1 to 14- sequence as follows
| Tighten bolts by hand.-- Tighten the bolts to 15 Nm.-- Tighten the bolts an additional 90°. |
Oil Separator Tightening Sequence
Tighten bolts to 9 Nm in the sequence -1 to 9-.
See also:
• Removal and Installation