Home ReviewsRefund
Home/Acura/TSX/Acura TSX II (2008-2014)/Repair manual/Power Tailgate (4-cyl)/Power Tailgate Buzzer Beep Pattern
Contents Wiring diagrams Section: Power Tailgate (4-cyl) All sections

Power Tailgate Buzzer Beep Pattern Acura TSX II

Power Tailgate (4-cyl)

Power Tailgate Buzzer Beep Pattern

ConditionBeep Pattern
When the tailgate starts to open automaticallyBeeps 1 time
When the tailgate starts to close automaticallyBeeps 1 time
When the reverse operation is started after the tailgate has detected any obstructionBeeps 3 times
When the reverse operation is started by switch operationBeeps 3 times
When the vehicle speed exceeds more than 0 mph (0 km/h) while the tailgate is opening automaticallyBeeps 3 times
When the fail-safe mode is detected (other than the neutral switch, the release switch, the ratchet switch, the full latch switch, or the half latch switch malfunction fail-safe mode) while the tailgate is operating automaticallyBeeps 3 times
When the operating time is overBeeps 3 times
When the vehicle speed exceeds more than 0 mph (0 km/h) while the tailgate is closing automaticallyBeeps intermittently until the condition is corrected
When the pinch sensor on mode is detected while the tailgate is closing automaticallyBeeps 3 times
When the pinch sensor fail-safe mode is detected while the tailgate is closing automaticallyBeeps 3 times
When the tailgate is not fully-latched, and the following condition is met: The shift lever is in any position other than P, the brake pedal position switch is OFF, and the vehicle speed exceeds more than 0 mph (0 km/h)Beeps intermittently until the condition is corrected
When the tailgate fall-down detection function is activatedBeeps continuously

BEEP PATTERN CONDITIONS CHART