Checking for DTCs
The temperature display indicates single or multiple DTCs. If no DTCs are present, the indicator remains blank.
Note. If the driver's indicator segments A, C, D, E, G, K, with the AUTO indicator, or the A/C ON indicator are on at the same time, there may be an open in the common ground wire.
Scheme 206
Scheme 207
Scheme 208
DTC DETECTION ITEM CHART
| DTC (Driver's Temperature Indicator Segment) | Detection Item |
|---|---|
| A | Climate control unit internal error (see DTC INDICATOR A: CLIMATE CONTROL UNIT INTERNAL ERROR ) |
| B | Output shaft (countershaft) speed sensor signal error. Check for DTCs in the PGM-FI system or the A/T system and go to the indicated DTCs troubleshooting. If no DTCs are found, replace the climate control unit (see CLIMATE CONTROL UNIT REMOVAL/INSTALLATION ) |
| C | Engine coolant temperature (ECT) sensor signal error. Check for DTCs in the PGM-FI system and go to the indicated DTCs troubleshooting. If no DTCs are found, replace the climate control unit (see CLIMATE CONTROL UNIT REMOVAL/INSTALLATION ) |
| D | Communication bus line error (BUS-OFF) (see DTC U1280: COMMUNICATION BUS LINE ERROR (BUS-OFF) ) |
DTC DETECTION ITEM CHART