Home ReviewsRefund
Home/Acura/TL/Acura TL IV facelift (2011-2014)/Repair manual/Climate Control/Checks Before Using the Sensor Input Display Mode
Contents Wiring diagrams Section: Climate Control All sections

Checks Before Using the Sensor Input Display Mode Acura TL IV facelift

Climate Control ~136 words

Checks Before Using the Sensor Input Display Mode

  1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and check the recirculation door function; press the recirculation button to switch from FRESH to RECIRC. The air volume and sound should change slightly.
  2. Set the desired test temperature using the driver's control switch: Press the SYNC button off, the LED turns off. When selecting the test temperature, note these items: "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC. "Hi" temperature setting will default to MAX HOT, HEAT, and FRESH. 58 through 86°F settings will use the automatic climate control logic.
  3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.