Note. If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Check for DTCs with the HDS. Is DTC B2159 indicated? YES -Go to step 4. NO -Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- Check for DTCs with the HDS. Is DTC B1161 also indicated? YES -Do the keyless access control unit input test (see «CONTROL UNIT INPUT TEST»(ref-348584-S05548461612009112400000) ). NO -Do the driver's MPCS unit input test (see «DRIVER'S MPCS UNIT INPUT TEST»(ref-348551-S34193089842009112400000) ).