Home ReviewsRefund
Home/Acura/RL/Acura RL II рестайлинг (2008-2012)/Repair manual/Rear Differential/SH-AWD Control Unit Initialization
Contents Section: Rear Differential All sections

SH-AWD Control Unit Initialization Acura RL II рестайлинг

Rear Differential 1 illustration

SH-AWD Control Unit Initialization

Whenever the SH-AWD control unit is replaced, it must initialized.

Scheme 7

Scheme 7: SH-AWD Control Unit Initialization
Scheme 7: SH-AWD Control Unit Initialization
  1. With the ignition switch to LOCK (0), connect the HDS to the 16P DLC (A) behind the driver's dashboard lower cover.
  2. Turn the ignition switch to ON (II).
  3. Make sure the HDS communicates with vehicle and the SH-AWD control unit. If it doesn't troubleshoot the DLC circuit (see «DLC CIRCUIT TROUBLESHOOTING»(/acura/rl/ii-2008-2012/remont/testing-diagnostics/#pgm-fi-system__dlc-circuit-troubleshooting) ).
  4. From the mode menu, select MISCELLANEOUS TEST, then select INITIALIZATION with the HDS and follow the screen prompts. NOTE: See the HDS help menu for specific instructions.