| Engine oil | Capacity | Engine overhaul | 5.8 L (6.1 US qt) | |
| Oil change including filter | 4.7 L (5.0 US qt) | |
| Oil change without filter | 4.5 L (4.8 US qt) | |
| Oil pump | Inner rotor-to-outer rotor radial clearance | | 0.10-0.17 mm (0.004-0.006 in) | 0.20 mm (0.007 in) |
| Pump housing-to-outer rotor radial clearance | | 0.035-0.090 mm (0.002-0.003 in) | 0.23 mm (0.009 in) |
| Pump housing-to-rotor axial clearance | | 0.030-0.075 mm (0.002-0.002 in) | 0.12 mm (0.004 in) |
| Balancer shafts, journal diameter | No. 1 journal, front shaft | 19.938-19.950 mm (0.78496-0.78543 in) | 19.92 mm (0.7843 in) |
| No. 1 journal, rear shaft | 23.938-23.950 mm (0.94244-0.94291 in) | 23.92 mm (0.9417 in) |
| Balancer shafts, journal taper | | 0.005 mm (0.00020 in) max. | |
| Balancer shafts, end play | Front | 0.060-0.140 mm (0.00236-0.00551 in) | 0.15 mm (0.0059 in) |
| Rear | 0.060-0.140 mm (0.00236-0.00551 in) | 0.15 mm (0.0059 in) |
| Balancer shafts, shaft-to-bearing clearance | No. 1 journal, front shaft | 0.050-0.082 mm (0.00197-0.00323 in) | 0.10 mm (0.0039 in) |
| No. 1 journal, rear shaft | 0.050-0.082 mm (0.00197-0.00323 in) | 0.10 mm (0.0039 in) |
| No. 2 journal, front shaft | 0.060-0.120 mm (0.00236-0.00472 in) | 0.15 mm (0.0059 in) |
| No. 2 journal, rear shaft | 0.060-0.120 mm (0.00236-0.00472 in) | 0.15 mm (0.0059 in) |
| Balancer shaft bearings, I.D. | No. 1 journal, front shaft | 20.000-20.020 mm (0.78740-0.78819 in) | 20.03 mm (0.7886 in) |
| No. 1 journal, rear shaft | 24.000-24.020 mm (0.94488-0.94567 in) | 24.03 mm (0.9461 in) |
| Oil pressure with oil temperature at 176°F (80°C) | At idle | 70 kPa (0.7 kgf/cm 2 , 10 psi) min. | |
| At 3, 000 RPM | 300 kPa (3.1 kgf/cm 2 , 44 psi) min. | |
