Home ReviewsRefund
Home/Acura/RDX/Acura RDX I (2006-2009)/Repair manual/Seats/Power Lumbar Support
Contents Wiring diagrams Section: Seats All sections

Power Lumbar Support Acura RDX I

Seats 6 illustrations ~116 words

Scheme 100

Scheme 100: Component Location Index
Scheme 100: Component Location Index

Scheme 101

Scheme 101: Circuit Diagram
Scheme 101: Circuit Diagram

Scheme 102

Scheme 102: Switch Test/Replacement
Scheme 102: Switch Test/Replacement

Scheme 103

Scheme 103
Scheme 103
  1. Separate the lumbar support switch cover (A) from the switch (B).
  2. Disconnect the 5P connector (C) from the switch.
  3. Check for continuity between the terminals in each switch position according to the table.
  4. If the continuity is not as specified, replace the switch.

Scheme 104

Scheme 104: Motor Test
Scheme 104: Motor Test

Scheme 105

Scheme 105
Scheme 105
  1. Remove the driver's seat .
  2. Disconnect the 2P connector (A) from the lumbar support motor.
  3. Test each motor by applying battery voltage and body ground to the terminals.
  4. If the motor does not run or fails to run smoothly, replace it (see «FRONT SEAT FRAME REPLACEMENT»(/acura/rdx/i-2006-2009/remont/seats/#seats__front-seat-frame-replacement) ).

More articles — Accessories & Equipment