Test
SRS components are located in the area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.
Scheme 1
Scheme 2
- Do the battery terminal disconnection procedure (See «DISCONNECTION»(/acura/mdx/ii-2006-2010/remont/body-electrical/#battery__disconnection) .
- Remove the steering column covers (see «COLUMN COVER REMOVAL/INSTALLATION»(/acura/mdx/ii-2006-2010/remont/exteriorinterior-trim/#dashboard__column-cover-removalinstallation) ).
- Disconnect the 7P connector (A) from the ignition switch (B).
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity does not agree with the table, replace the ignition switch (see «REPLACEMENT»(/acura/mdx/ii-2006-2010/remont/ignition-switchsteering-lock/#ignition-switch__replacement) ).
- Do the battery terminal reconnection procedure (See «RECONNECTION»(/acura/mdx/ii-2006-2010/remont/body-electrical/#battery__reconnection) ).
Replacement
SRS components are located in the area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.
Scheme 3
- Do the battery terminal disconnection procedure(See «DISCONNECTION»(/acura/mdx/ii-2006-2010/remont/body-electrical/#battery__disconnection) .
- Remove the steering column covers (see «COLUMN COVER REMOVAL/INSTALLATION»(/acura/mdx/ii-2006-2010/remont/exteriorinterior-trim/#dashboard__column-cover-removalinstallation) ).
- Disconnect the 7P connector (A) from the ignition switch (B).
- Remove the two screws and the ignition switch.
- Install the parts in the reverse order of removal.
- Do the battery terminal reconnection procedure (See «RECONNECTION»(/acura/mdx/ii-2006-2010/remont/body-electrical/#battery__reconnection) ).