Wiring diagram: Data buses — LIN1 Wey VV7 PHEV I
All systems
- Acoustic signal 2
- Air conditioning system 6
- Airbag system 2
- Auto-dimming interior mirror 2
- Automatic parking system 2
- BCM 2
- BSG motor control unit 2
- Central locking switch 2
- Charger socket and front row single USB socket 2
- Combination switch 2
- Common points of ground 36
- Data buses 11
- Diagnostic gateway and interface 2
- Door lock system 2
- DVR control unit 2
- DVR power connector
- Engine management system (E20CB) 2
- EPS system
- ESP control system 2
- Exterior mirror system 3
- Face Recognition System 2
- High Voltage Battery 2
- HMI system 2
- iBooster system 2
- Instrument cluster 2
- Intelligent front camera 2
- Intelligent interior rear-view mirror 2
- Left and right switch blocks 2
- Lighting system 20
- Mode switch 2
- Multimedia system, built-in amplifier
- Multimedia system, separate amplifier 2
- On-Board Charger (OBC) 2
- Parking sensors 2
- PEPS system 2
- Power supply 12 V center console 2
- Power supply system
- Power windows 5
- PTC Battery Heater 2
- Radar Module 2
- Rain and light sensor 2
- Rear axle gearbox control unit 2
- Rear parking sensors 2
- Sealed fuel tank hatch motor 2
- Seating system 9
- Sounder system 2
- Steering wheel angle sensor 2
- Sunroof 2
- T-BOX system 2
- Traction motor control unit 2
- Transmission control system 4
- Trunk door system 3
- Tyre pressure monitoring system 2
- Vehicle Control Unit (VCU) 2
- Windshield wipers and washers 3
- Wireless Phone Charging System 2
- Fuse blocks 4
- Location of connectors 13
- Location of control units 4
- Points of ground 7
Wiring diagram — Data buses Wey VV7 PHEV I — LIN1
Login- Diagnostic interface
- Electric boot lid control unit
- Front Passenger Door Window Lifter Switch
- Driver Door Window Lifter Switch
- Rear Right Door Window Lifter Switch Assembly
- Left rear door power window switch assembly
- 7020 - wire, orange with black stripe