Home ReviewsRefund
Home/Volvo/XC90/Volvo XC90 I рестайлинг (2006-2014)/Repair manual/Interior Equipment - Removal, Replacement and Installation/INSTALLING THE FRONT COLLISION SENSOR
Contents Section: Interior Equipment - Removal, Replacement and Installation All sections

INSTALLING THE FRONT COLLISION SENSOR Volvo XC90 I рестайлинг

Interior Equipment - Removal, Replacement and Installation 1 illustration

INSTALLING THE FRONT COLLISION SENSOR

Note. For tightening torques, see GENERAL TIGHTENING TORQUE .

Install

  1. the headlamp. See
  2. the connector
  3. the 2 M6 screws. Tighten

Disconnect the battery lead. See BATTERY, DISCONNECTING .

Scheme 96

Scheme 96: REMOVING THE CONTACT REEL
Scheme 96: REMOVING THE CONTACT REEL

Remove

  1. the steering column covers. See «REPLACING THE STEERING COLUMN COVERS»(ref-476866-S42527809192012060500000)
  2. the steering wheel according to «STEERING WHEEL, REPLACING»(ref-476734-S01202875892012060500000) .

Disconnect the left connector.

Remove

  1. four screws
  2. the contact reel.