TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| 850, C70, S70 & V70 |
| Front |
| Locating Pins | 22 (30) |
| Locating Pins & Bolt | 6 (8) |
| Mounting Bolts | 75 (100) |
| Wheel Lug Nuts | 80 (110) |
| Bleed Nipple | 7 (9) |
| Rear |
| Locating Pins & Bolt | 6 (8) |
| Mounting Bolts | 45 (60) |
| Bleed Nipple | 4 (5) |
| Wheel Lug Nuts | 80 (110) |
| Brake Pipe | 10 (14) |
| 960, S90 & V90 |
| Front |
| Lower Guide Pin | 20 (27) |
| Mounting Bolts | 74 (100) |
| Wheel Lug Nuts | 63 (85) |
| Rear (Live Rear Axle) | |
| Mounting Bolts | 43 (58) |
| Wheel Lug Nuts | 63 (85) |
| Rear (Multilink) |
| Mounting Bolts | 43 (58) |
| Upper & Lower Guide Pin | 25 (34) |
| Wheel Lug Nuts | 63 (85) |
| Master Cylinder Mounting Bolts | 22 (30) |
| Power Booster Mounting Nuts (850) | 18 (25) |
| Application | In. (mm) |
|---|
| 850, C70, S70 & V70 |
| Disc Diameter |
| Front | 11.02 (280) |
| Rear | 11.61 (295) |
| Original Thickness |
| Front | 1.02 (26) |
| Rear | .38 (9.6) |
| Minimum Thickness |
| Front | .90 (23) |
| Rear | .33 (8.4) |
| Minimum Refinish Thickness | (1) |
| Discard Thickness |
| Front | .93 (23.8) |
| Rear | .35 (8.9) |
| Lateral Runout (Maximum) |
| Front | .0016 (.040) |
| Rear | .003 (.080) |
| Master Cylinder Diameters |
| Primary | .94 (23.8) |
| Secondary | .66 (16.8) |
| 960, S90 & V90 |
| Original Thickness |
| Front | 1.02 (26) |
| Rear (Live Rear Axle) | .38 (9.6) |
| Rear (Multilink) | .39 (10) |
| Minimum Thickness |
| Front | .90 (23) |
| Rear (Live Rear Axle) | .33 (8.4) |
| Rear (Multilink) | .31 (8) |
| Minimum Refinish Thickness | (1) |
| Discard Thickness |
| Front | .93 (23.8) |
| Rear (Live Rear Axle) | .35 (8.9) |
| Rear (Multilink) | .33 (8.5) |
| (1) Always use minimum thickness specification stamped on rotors. |
| (1) | Always use minimum thickness specification stamped on rotors. |
DISC BRAKE SPECIFICATIONS
