Installing Mounting Volvo V70 II facelift

Installing Mounting

Illustration is for left-hand drive cars

Scheme 714

Illustration is for right-hand drive cars

Scheme 715

Position 1

1. Take the shorter screw and three thin washers from the kit
2. Slide two thin washers onto the screw
3. Slide the screw through the mounting
4. Slide a thin washer onto the screw.

Position 2

1. Take the longer screw and the three thin and the slightly larger washers from the kit
2. Slide two thin washers onto the screw
3. Slide the screw through the mounting
4. Slide the slightly larger washer and then the remaining thin washer onto the screw.

Finally

1. Secure the mounting in place. Tighten the screws a quarter turn.

Scheme 716

1. Secure the waste paper basket on the mounting from above and down.