Gear Selector Boot - Replacing Volvo V40 I рестайлинг

Panel boot gear selector, replacing

Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Scheme 123

Move the gear selector/gear selector lever to a rear position.

Detach the panel at the rear edge using a weatherstrip tool.

Then carefully detach the front edge of the panel.

Scheme 124

Open the 4 catches on the underneath.

Press the inner section of the panel up and release the frame.

Installing cover panel gear shift selector

Press the catches for the boot into place in the top panel.

Align the panel at the front edge, bend the panel down and press the panel into the center console.