Installing control module Volvo V40 I рестайлинг

Installing control module

1. Screw the control module screw into place.
2. Connect the connector for the control module.
3. Reinstall the cover for the control module connector.
4. Connect the 2 connectors.
5. Press the bulb holder into place.
6. Install the ground lead.
7. Install the 2 screws at the front edge.
8. Install the lens.

Program in the data read off from the old control module.

Scheme 170

Remove

1. the cover panel
2. the two screws.

There is a catch at the mounting

Press the catch inwards and twist the sun visor outwards in the car.

Disconnect and disassemble the connector.

HINT: Do not forget to secure the wiring and connector before installation.

Install

In reverse order.