Engine Control Module (ECM) Diagnostic Trouble Codes - 3 of 11: Maintenance Volvo S80 II

RESET ADAPTATIONS

1. Turn off the engine.
2. Ignition on Reset adaptations to zero by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-499282-S18662467152012090500000)

1. Turn off the engine.
2. Ignition on Reset adaptations to zero by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-499282-S29612458822012090500000)

1. Turn off the engine.
2. Ignition on Reset adaptations to zero by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-499282-S29163587852012090500000)

1. Turn off the engine.
2. Ignition on Reset adaptations to zero by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-499282-S16919225692012090500000)

1. Turn off the engine.
2. Ignition on Reset adaptations to zero by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool). This is done to give the system a normal starting point. Thus it can be seen faster if the adaptations run off up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-499282-S22898062072012090500000)