Removing Components From The Sub-Frame Volvo S80 I рестайлинг

Removing Components From The Sub-Frame

Remove the screw for the cable duct.

Remove

1. the oil pipe for the steering gear from the snap fasteners along the sub-frame
2. the hose for the EVAP canister in the clips on the upper side of the sub-frame
3. any fuel line for the engine block heater and any engine block heater if mounted on the left hand side of the sub-frame
4. the air duct from the clip
5. the screw for the ground cable bracket
6. the connectors for the heated oxygen sensors (HO2S) in the clips at the rear of the sub-frame.