Home/Volvo/S80/Volvo S80 I рестайлинг (2003-2006)/Repair manual/Electrical System - General Information/Opening secondary locking, Example 2B

Contents

Section: Electrical System - General Information

Cable Terminals box, p/n 9814232

Cable Terminals Kit, p/n 9814233

Cable Terminals Kit, p/n 9814234

Cable terminals, different types

Cable terminals are divided up into the following main groups

Checking the cable

Fault-tracing information

Connector anti-lock braking system module (ABS)

Connector sealed type 1

Dismantling

Connector sealed, type 2

Connector sealed, type 3

Connector type 1

Connector type 2

Connector type 3

Connector type 4

Connector type 5

Connector type 6

Connector type 7

Explanation

Battery voltage, value

Distance, value

Passenger compartment temperature, value

Outside temperature, value

Engine running, status

Time, value

Power supply for the reverse (reversing) warning system, status

Sound signal for the reverse (reversing) warning system, status

Power supply to the buzzer cable for the reverse (reversing) warning system, status

Power supply to the relay for the engine block heater, status

Power supply for remote start, status

Voltage on the signal cable for remote start, status

Power supply for alarm cable P0 or P1, status

Power supply for alarm cable S0 or S1, status

Power supply for carphone mute, status

Voltage on the carphone mute cable, status

Rheostat signal, value

Speed signal, value

Power supply for aerial amplifier, status

Opening secondary locking, Example 1

Insert new cable terminal

Opening secondary locking, Example 2A

Crimp new cable terminal

Insert new cable terminal in housing

Opening secondary locking, Example 2B

Insert the new cable terminal in housing

Opening secondary locking, Example 3

Extract the cable terminal

Insert the new cable terminal in the housing

Opening secondary locking, Example 4

All sections

Opening secondary locking, Example 2B Volvo S80 I рестайлинг

Electrical System - General Information

Opening secondary locking, Example 2B

Pin type housing p/n 3545784-5

The cable terminal is 1.6 Pin.

Use strip length 3 to 4 mm and strip the cable as described in. See «Cutting and checking a cable»(ref-440496-S31972403762011121400000) and «Stripping the cable»(ref-440496-S30193642562011121400000) .
Use crimp tool (green) p/n «9814226»(ref-403953-S16029971462011061000000) and crimp the cable terminal as described in. See «Terminal crimping in general»(ref-440496-S28870707242011121400000) «Cable terminals - crimping core wings»(ref-440496-S40581853752011121400000) «Choice of crimp tool»(ref-440496-S38828196992011121400000) «Crimping a cable terminal»(ref-440496-S20047154402011121400000) .