Home ReviewsRefund
Home/Volvo/S70/Volvo S70 I (1997-2000)/Repair manual/Testing & Diagnostics/Engine Controls - System/component Tests: Adjustments
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Controls - System/component Tests: Adjustments Volvo S70 I

Testing & Diagnostics 1 illustration

Basic Adjustment Of Pressure Regulator Push Rod

  1. Remove locking circlip from end of push rod. Connect Pressure Gauge (999-5230 ) and Pressure Tester (999-5496 ) to pressure regulator. (Scheme 37) Increase pressure to 1.7-1.9 psi (11.7-13.1 kPa). Press wastegate lever against turbine housing, closing wastegate valve.
  2. Adjust push rod length so push rod fits exactly over wastegate valve lever. Install locking circlip, and tighten push rod lock nut. Remove pressure gauge and tester.

Scheme 37

Scheme 37
Scheme 37

More articles — Engine Controls - System/component Tests