READING OFF THE PARAMETER VALUES
With this function, the values and status of parameters can be read from the driver door module (DDM) and passenger door module (PDM).
This function makes it possible to activate components/functions in the driver door module (DDM) and passenger door module (PDM).
With this option it is possible to read programmed data and to program in data.
Note. If the control module has been replaced, the position of the windows must be initiated using a diagnostic function. A window must be in its uppermost position before it can be initiated.
No customer related programming is available in the control module.
New software can be downloaded into the passenger door module (PDM) and the driver door module (DDM). When ordering software, the hardware and the software in the car is compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the software is downloaded.
The window positions must be initialized again after replacing the control module. This is so that the new control module stores the closed position of the window. Initialization is carried out using the diagnostic tool.
See appropriate service information regarding Central locking.