COMPONENT SPECIFICATIONS
The component specification gives the value of the component when the connector is disconnected. Where no value is given, it is not possible to measure a relevant value at the component.
The figure within the brackets indicates the terminal pin on the component to which the value refers.
| Designation | Type | Supply voltage | Value | Other |
|---|---|---|---|---|
| Body sensor cluster stability sensor (BSC) | CAN node with integrated yaw rate sensor, lateral accelerometer and accelerometer (AWD only) | 12 V (#3) | The body sensor cluster stability sensor (BSC) contains either two (2WD) or three (AWD) sensors and is connected to the brake control module (BCM) by its own CAN lead. | |
| Wheel sensor | Hall sensor | 12 V (#1) | Tooth against sensor: Iapprox. 14 mA Uapprox. 9 V Cover against sensor: Iapprox. 7 mA Uapprox. 1 V below Ubat | |
| Pedal position sensor | Slide potentiometer | 5 V (#1) | 0 mm: approx. 0 V 38.5 mm: approx. 95% of Ubat |