WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Anti-Roll Bar Link-To-Spring Strut | 37 (50) |
| Ball Joint Nut | (1) 13 (18) |
| Control Arm-To-Sub-Frame Nut | (1) (3) 48 (65) |
| Drive Shaft Nut | (2) 89 (120) |
| Frame Bolt (Left Side) | (1) 77 (105) |
| Frame Bracket Bolt (Right Side) | 37 (50) |
| Hub Torx Bolt | (2) 33 (45) |
| Spring Seat Nut | 52 (70) |
| Spring Strut Nut | 52 (70) |
| Spring Strut-To-Axle Shaft Nut | 48 (65) |
| Spring Strut-To-Shock Tower Nut | 18 (25) |
| Steering Gear Nut | 37 (50) |
| INCH Lbs. (N.m) |
| Brake Rotor Bolt | 72 (8) |
| (1) Tighten an additional 120 degrees. (2) Tighten an additional 60 degrees. (3) Tighten an additional 90 degrees. |
| (1) | Tighten an additional 120 degrees. |
| (2) | Tighten an additional 60 degrees. |
| (3) | Tighten an additional 90 degrees. |
