Home ReviewsRefund
Home/Volkswagen/Touareg/Volkswagen Touareg I (2002-2006)/Repair manual/Electrical Equipment/Access/start authorization button E408 , removing and insta…
Contents Wiring diagrams Section: Electrical Equipment All sections

Access/start authorization button E408 , removing and installing Volkswagen Touareg I

Electrical Equipment 1 illustration

Access/start authorization button E408 , removing and installing

Removing

  1. Switch off ignition, switch off all electrical components and remove ignition key.
CAUTIONWhen disconnecting battery, procedure must always be followed as described in the article. Not adhering to sequence will result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.
  1. Disconnect battery --> «Battery, disconnecting and reconnecting»(ref-281400-S09101717962008031100000) .
  2. Remove gear selector cover --> 68 - INTERIOR EQUIPMENT .

Scheme 348

Scheme 348
Scheme 348
  1. Remove screws - arrows -.
  2. Disconnect electrical connector.
  3. Remove Access/Start Authorization Button E408.

Installing

Install in reverse order of removal, noting the following

Note. Adaptation or coding of Access/Start Authorization Button E408 after removing and installing is not necessary.