FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|---|---|
| Air Conditioning Condenser to Radiator Bolt | 5 | |
| Auxiliary Cooler Nut | 20 | |
| Connecting Piece to Cylinder Head Bolt | 10 | |
| Coolant Expansion Tank to Body Bolt | 5 | |
| Coolant Pipe to Timing Chain Cover Bolt | 10 | |
| Coolant Pipe to Cylinder Head Bolt | 10 | |
| Coolant Pipe (Side, Bottom) to Cylinder Block Bolt | 25 | |
| Coolant Pipe (Side, Top) to Cylinder Head Bolt | 10 | |
| Coolant Pump to Cylinder Block Bolt | 8 | |
| Coolant Pump Pulley to Coolant Pump Bolt | 20 | |
| Cover to Thermostat Housing Bolt | 8 | |
| Engine Mount to Engine Mount Bracket Bolt (1) | 60 + 90° | |
| Fan Shroud to Radiator Bolt | 5 | |
| Fan to Fan Shroud Nut | 10 | |
| Radiator to Lock Carrier | 5 | |
| Rear Coolant Pipe to Cylinder Head Nut | 20 | |
| Rear Frame Mount to Front Frame Mount Bolt | 5 | |
| (1) Always replace | ||
| (1) | Always replace |
Accessory Bracket Bolt Tightening Sequence and Specification
Tighten the alignment bolts -2 and 4- hand-tight.
Tighten the bolts -1, 3 and 5- hand-tight.
Tighten all the bolts uniformly and in a diagonal sequence to 23 Nm