Engine data
| Code letters | AUG | AWM | ||
|---|---|---|---|---|
| Manufactured | 05.00 --> 10.00 | 11.00 --> | ||
| Displacement | L | 1.8 | 1.8 | |
| Output | KW/rpm | 110/5700 | 125/5900 | |
| Torque | Nm/rpm | 210/17504600 | 225/19505000 | |
| Bore | Mm | 81.0 | 81.0 | |
| Stroke | Mm | 86.4 | 86.4 | |
| Compression ratio | 9.3 | 9.3 | ||
| Valves per cylinder | 5 | 5 | ||
| Recommended fuel (RON) | 95 unleaded | 95 unleaded | ||
| Fuel injection, ignition | Motronic ME7.5 | Motronic ME7.5 | ||
| Emission certification | ULEV | ULEV | ||
| Electronic Power Control (EPC) system | Yes | Yes | ||
| Detonation (knock) control | 2 sensors | 2 sensors | ||
| Oxygen sensor regulation | 2 sensors | 2 sensors | ||
| Catalytic converter | Yes | Yes | ||
| Exhaust gas recirculation (EGR) | No | No | ||
| Variable valve timing | Yes | Yes | ||
| Turbocharger | Yes | Yes | ||
| Secondary Air Injection (AIR) system | Yes | Yes | ||
Scheme 558
Special tools, testers and auxiliary items required
- Engine support adapter 3147
- Additional hooks 10-222 A/2
- Engine Sling 2024 A
- Engine support bridge 10-222 A with bracket for engine 10-222 A/1
- Holding fixture VW 313
- Holding fixture VW 540
Scheme 559
Special tools, testers and auxiliary items required
- Drip tray V.A.G 1306
- Torque wrench 5-50 Nm V.A.G 1331
- Torque wrench 40-200 Nm V.A.G 1332
- Engine/gearbox jack V.A.G 1383 A
- Support T10062
- Spring-type clip pliers VAS 5024
Scheme 560
Special tools, testers and auxiliary items required
- Spacers VW 540/1B
- Shop crane V.A.G 1202 A
- Step ladder VAS 5085
- Shackle T10059
- Grease G 000 100 (Vehicles with manual transmission)
- Cable tie
Scheme 561
Changing mount T10062
- Drill an additional hole centered at height of lower bore if not yet present.
- a = 8.5 mm